Originally Posted by oldandtired
I finally found the number to Brooks tech line. The torque is indeed 75 ft lbs, but desoto30 and TS1955 were correct with the oil statement, (no moly is used for alunimum).
75 oil would be equal to 55-65 moly for a steel application.
Thanks to all... Learned something today.
Dave
What are you saying, i also have a set of sm/blk C&A rods and was also wondering how much to torque them. Are you saying that brooks said don't use moly, just use oil, are you saying if you use moly on the alum rods the torque value woule be less, or don't use moly at all. I also need to know.
Thanks.
Zip.