View Single Post
Old 02-07-2009, 10:22 AM
  #13  
blownalky3
Senior Member
MASTER BUILDER
 
Join Date: Jun 2003
Posts: 239
Default Heads

This part number head is one that years ago was used in pro stock and as such every set has epoxy. I was totally upfront about this as was I they were filled solid so no water here. They were not cracked and I was honest. I was honest to the point of if they were supposedly cracked I replaced them with new along with the 8 run old lifters he bitched about. He then never sent anything back and had the stones to say the new lifters I sent were rebuilt when they still had the wrap on them. And if you read the other thread this was a trade for a Jr. The motor and clutch in this car were junk and he admittedly writes he welded the backhalf of the car at the track and it don't look so good. I unfortunatly found out about the motor and clutch AFTER I tried to make good the head situation. I want to stress, I do not feel these heads were cracked in any way and were as I described them. If he was honest about it he would have sent the parts back as agreed especially if they were cracked as he asserts. AND HE SOLD BOTH SETS ON THIS SITE and refuses to take responsabilty for the Jr motor or clutch
blownalky3 is offline