hotrodharley

not the same..i found it also..this is a machine shop that only does this work is what e-mail Rose sent me.

Hello Sir,
Yes we do owned a machine shop here in Southern California and the name of our shop is Nu-Tech Hi Performance but we go by Nutech Racing for short...We do a lot of customize work. If you have anything in mind that needs to be done just ask me if we could do it for you.

WE ALSO OFFER CUSTOMIZE MACHINING :

***BLOWER INTAKE MANIFOLD O-RING GROOVING (TOP).***

***BACKFIRE VALVE INSTALLATION.***

***BLOWER ,INTAKE MANIFOLD /WELDING***

***FIXED THREAD(LOOSE THREAD)(BROKEN STUD)***

***FLY-CUT INTAKE MANIFOLD RAILS (BOTH SIDE)***

***POLISH INTAKES AND BLOWERS***

*CUT PULLEY'S LENGTH INSIZE 1/2 PITCH/ 8.0MM/13.9 MM/14.0 MM*

***CUT BELT IN SIZE 1/2 PITCH ,8.0MM/13.9/14.0MM***

***REBUILD BLOWERS***

***MACHINE AND TEFLON ROTORS 6 POINTS***

***TRIPLE PINNING (ROTORS)***

***HONE INSIDE CASE***

***WELD /MACHINE ROTORS***

***MACHINE /INSTALL BLOWER SIGHT GAUGE /PREASSURE RELIEF VALVE***

***HARD ANODIZING INSIDE BLOWER /REAR -FRONT BEARING PLATE /ROTORS***

***WE CUSTOMIZE CENTER TO CENTER DUAL CARB SCOOP ***

***FABRICATE/CUSTUMIZE AFTER MARKET CRANK HUB ***

***BLACK ANODIZING DRIVE KITS***

***CONVERTS AFTER MARKET MANIFOLD INSTALL E.F.I.***

***FABRICATE ODD HARD TO FIND PARTS ***

***FABRICATE SPACER ODD SIZE ***

***PREP AND CHROME CARBURATOR***

***FABRICATE LINKAGE SHAFT 10-32 L/R HEIM END***

***MACHINE /INSTALL INJECTOR NOZZLE BODY IN PORT/ HAT***

Thanks,
Rose