Originally Posted by zipper06
Hey BJ,
I don't know about the cam but most blower cams are about 112 C/L and a shorter lift on the exhaust like a nitrous cam. If that's a mono leaf car they wind up like you wouldn't believe, depending on the length of the slapper bars. You can put wedges between the pads and the springs and i think you already know about 3*'s is close to ballpark. You may want to get some 1 7/8" headers, because you can't put it in if you can't get it out.
Don't take any of this as facts, it's just how i would look at it for starters.
PS, did you find a blower yet?
Zip.
Ok thanks Zip.....No i haven't put my Finger on A blower yet..but i am being patient and waiting on a Decent deal..Not to re-hash anything here but i just WILL NOT pay within a couple of hundred dollars for
any item when a new one can be purchased for just a few more dollars. i know many guys will i just ain't one of them..
also the more i look into this blower set up i am not so sure that a 177 would not be more appropriate for the 406 (ci).