well I quess I was being to easy, after a week of no returned phone calls or messages I feel like I have been duped. I will list on here the messages we traded back and forth. Jake Hammond of Morgantown Kentucky is the person I dealt with on the trade. Car was supposed to have roller rockers but it did not, and he was supposed to ship them to me. Also was told the car was turnkey but it was far from it with no brake fluid in the master cylinder and the left rear wheel cylinder blown out. all light were supposed to be functional but the turn signal switch is busted off in the column and last but not least he never mentioned the car had a salvage/rebuilt title. Shame on me for not fully inspecting the car at the time of the trade but shame on him for not following up on his promise.
read the text from the bottom to the top.
have to ship them out monday.
On [2008-10-04 14:50:33] harbone66 wrote:
> jake,
> I was checking to see if you had shipped the rockers yet?
>
> Chris
>
> On [2008-09-28 19:51:13] Ham10 wrote:
> > i will have them this weekend and will be shipped out, should be there by the end of next week.
> >
> > On [2008-09-28 19:49:57] harbone66 wrote:
> > > Jake,
> > > Whats the status on the rockers?
> > >
> > > Chris
> > > On [2008-09-23 20:36:38] Ham10 wrote:
> > > > do what you please the guy told me everything that was done to the car, i took the value covers off as soon as i got the car and seen the rockers so i took his word for it. if i was trying to crook you do you actually think i would be sending you roller rockers come on man. do think a crook is goin to ask someone to take a pic with them when they switch cars, i think your a good guy easy to work with. im as pissed as you are, shit like that makes me look bad. i could be asking you for a new fuel pump but im not, im sure you didnt know it was getting ready to go out. your roller rockers with be on the way as soon as i get them. Jake
> > > >
> > > > On [2008-09-23 20:28:36] harbone66 wrote:
> > > > > so should I take the intake off and the heads and make sure this engine is what its supposed to be??? I have a serious concern here...
> > > > > > > > > >
> > > > >
> > > > > On [2008-09-23 20:16:21] Ham10 wrote:
> > > > > > he admited to taking them and sold them at a race auction. he is suppose to get me another set. send me your mailing add. and i will send them as soon as he gets them to me. Jake
> > > > > >
> > > > > > On [2008-09-23 19:58:59] harbone66 wrote:
> > > > > > > jake,
> > > > > > > so whats going on ?
> > > > > > >
> > > > > > > Chris
> > > > > > >
> > > > > > > On [2008-09-21 22:38:41] Ham10 wrote:
> > > > > > > > 10-4!
> > > > > > > >
> > > > > > > > On [2008-09-21 22:10:49] harbone66 wrote:
> > > > > > > > > let me know, I am in Chicago the next 2 days at a seminar. If all else fails call me on my cell phone and let me know whats going on.
> > > > > > > > >
> > > > > > > > > On [2008-09-21 21:39:46] Ham10 wrote:
> > > > > > > > > > i've called him several times today and left messages on his phone no returned calls, i've still got a key to his shop so after work tom. im gonna drive over there, if he isn't there im still gonna get into his shop. one way or another i will send you some roller rockers. i dont think he realizes that him not answering his phone makes him suspious. Jake
> > > > > > > > > >
> > > > > > > > > > On [2008-09-21 21:15:58] harbone66 wrote:
> > > > > > > > > > > Jake,
> > > > > > > > > > > So whats going on with this deal?
> > > > > > > > > > >
> > > > > > > > > > > Chris
> > > > > > > > > > > On [2008-09-20 23:38:48] Ham10 wrote:
> > > > > > > > > > > > no problem i kinda knew it was getting ready to go, it was an easy fix though.
> > > > > > > > > > > >
> > > > > > > > > > > > On [2008-09-20 23:37:11] harbone66 wrote:
> > > > > > > > > > > > >
> > > > > > > > > > > > > I apologize for the pump, it ran fine on august 24th when i raced it last and fired right up when i put it on the trailer last nite. I drained all the alcohol out after the last race but that crap is volitale and just eats away at everything. let me know whats goin on. oh yeah, the master cylinder was almost bone dry, front resevoir empty, rear at the bottom...
> > > > > > > > > > > > >
> > > > > > > > > > > > > On [2008-09-20 23:17:35] Ham10 wrote:
> > > > > > > > > > > > > > i tried calling him a few minutes ago but no answer, usually he answers its kinda funny he knew i traded today and isn't answering his phone, im gonna get to the bottom of it, trust me it pisses me off. i'll get you some rockers, oh and by the the fuel pump crashed but i had an extra in the shop so it wasn't no big deal. i will let you know something tom. Jake
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > On [2008-09-20 21:06:15] harbone66 wrote:
> > > > > > > > > > > > > > > Jake,
> > > > > > > > > > > > > > > Ok, I wish you would have said something about the title being salvaged and that kinda spooked me. Then when I pulled the valve covers off I was really gettin worried. I have faith that you will stick to your word. Yes, I am a believer in kharma too. let me know. I will gladly send you a pic as confirmation if you like but they are just steel rockers...
> > > > > > > > > > > > > > > Chris
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > On [2008-09-20 20:28:11] Ham10 wrote:
> > > > > > > > > > > > > > > > There is now way! I pulled the value covers off when i first got the car and there were roller rockers, the only possible way is if my so called BUDDY!! took them, the car had been sitting at his shop for about a week and a half. give me till tom. and i will find out, i'm a true believer if you do someone wrong it will come back to you!!! i will send you a set of roller rockers as soon as i find out what happened to them. Jake
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > On [2008-09-20 19:12:48] harbone66 wrote:
> > > > > > > > > > > > > > > > > Jake,
> > > > > > > > > > > > > > > > > OK. In your listing you say it has roller cam and roller rockers. I pulled the valve covers and all it has its stock stamped steel rockers and stock pushrods! I am starting to get the feeling I was scammed!