Originally Posted by altune
We had the same deal on a MSD setup. The tech guy told me to reverse the signal wires and then check it. It seems sometimes they ship them with the wires being put in the wrong side of the connector.
Al
I agree it could be the purple and green wires need to be reversed. I had one do that one time, reversed the wires and fixed it.
On the gear ratio, for 200' mud drags its just about impossible to get too low of a gear ratio. A 6.00 gear would get you to a 11.44-1 ratio in low gear. The front is the tricky one, with a 40" tire on front I would probably try to get around a 5.50 ratio in the front, this should be able to be corrected in the sprocket arrangment to the front driveshaft, without changing ring and pinion.