Resettable breaker for Alternator protection..
http://www.evparts.com/prod-CB5510.htm
SS 69SS... I couldn't find where I got mine, but I got this recommendation from "Wolf" ... on YellowBullet. Or.. you can go with this:
https://www.vtewarehouse.com/content...a/megafuse.php
Slow blow fuse 150amp..
I found mine in black.. cuz Im a cosmetics guy, lol.. but all the same.
Good luck!
I actually use Terminal Supply for most of my goodies.
... additional info:
FYI -
http://www.sonicelectronix.com/item_...C+PAC-200.html
I am using this guy to basically isolate all my cars electrical requirements from the alternator back-feed issue that can arise.
Master Kill is turned on which feeds my remote starter solenoid fused at 250 amps (slow blow) .. through Mega fuse holder previously listed.
From Master Kill to the PAC 200amp contactor listed - from this contactors load side I feed to my Dedenbear Relay Center MRC1, which basically feeds the entire cars electrical needs. ie. (Fuel pump, dual fans, water pump, ignition .. and electronics. )I've jumped off the line side of this cont. duty contactor with a #10 cu (fused at 30amps) conductor to my firewall and horn relay, which feeds power only to my lights and turn signals etc.. From the horn relay I send a #12 cu. to power to my Painless 6 switch panel. These switches are my trigger inputs for all my relays at the Dedenbear relay center - one of which is my ignition relay (feeds my Digital 6), which I use to also activate (open and close) the Continuous Duty 200amp Contactor. So, engine is dead when master kill is clicked off or when ignition is switched off... And NO Alternator Backfeed** cuz when I flip the ignition switch off it also takes power off my cont. duty contactor, opening (isolating) this main feed line to my relay center (ignition being the key)... killing everything but my lights.
The alternator feed.. direct from alternator with 1/0 cu. feeds straight back to a the manual 150 amp resettable breaker previously listed and then to one of the positive terminals on battery.
Hope this helps.
__________________
Jeff Mill
JRacing Products
Bellevue, WA.
425-327-0810
Top Name Sportsman Drag Race Components:
***************************************
AFR, Dart, Brodix, CFE & BMF, Manley, Erson, JE, Ross, Wiseco, Ferrea, Akerly and Childs, Moroso, Pro Systems, Isky, Dedenbear, Altronics, Hughes Performance Entire Line, Trans Specialties, Strange Engineering, Entire Line.. and more!
... need further explanation..??? let me know.. glad to help.