Yes it is the car in avatar.......but that was before i sent it to a suspension guy....he put the ladder bars up one hole figuring the car would pull the wheels to high after the changes he did.....he raised the front end of the car 2inchs with new front springs,replaced the back shocks and replaced the coil overs from the 240 psi springs to 125 psi springs they r mounted in front of the rear end.........the hurricane intake is ported alot and flowing unreal numbers the victor heads weren't as a guy screwed them up that is why i am replacing them with the new afr 210 competition heads the flow numbers r alot higher from the bottom to the top...i think the heads were killing me......i guess i will find out............i can leave the ladder bars were they r until after how i see how the new heads work out and the carb work.....hurricane is made by world products.......he cut a wackout of it i have the flow sheet at home if u guys want me to give u the flow numbers...........thanks and does this help or am i going in the wrong direction