Hey Brian,
Well, I found out what the elky wants per the setup I have in it now, and due to the small tire configuration(29 x 11 x 15) it needs lower rpm's on the launch, all I can say. I was trying to get a big tire launch with a small tire and looked like a fuel car, it even shook and spun the tires :shock: I felt like a fuel driver 8) but stunck for racing the brackets completely.
So, plan is to leave lower until I can get another gearset in the rear end as I am out of tire space and Hoosier does not make a 30 x 11 wide slick, so I will have to tame it down for the remainder of the year. I went to a race at Stanton, Mich. last weekend during the holiday and did lousy, except on the final 1st rnd, I dialed a 10:30 with out having two back to back passes to dial from that were close to et's, and well we were heads up, the stang got out first and I ran him down and he dumped right at the strip and I ran her thru and went a 10:299 on a 10:30 dial, so If I had of dumped also with him, I may have won the round, but good raceing nonetheless. More later after I hit another event. I finally got the gloves, pants and the chassis certified to run 9's, now it just needs to run 9's so I can get the runs completed. Keep your fingers crossed.
Later
Elkyman