Racingjunk Forums

Racingjunk Forums (https://www.racingjunk.com/forums/index.php)
-   General Discussion (https://www.racingjunk.com/forums/forumdisplay.php?f=7)
-   -   ford nine in. (https://www.racingjunk.com/forums/showthread.php?t=30759)

briscoman 07-30-2011 10:44 AM

ford nine in.
 
Did a gear pack change with a complete oil drain, have put in three quarts and has not flowed out filler hole. Keep going or hold off???? Thanks for the reply

TheYellaBrick 07-30-2011 02:10 PM

I know this sounds pretty basic but, is the rear axle housing LEVEL? If one side is lower, it'll fill up the entire housing tube on the low side.

Harbone 07-30-2011 06:47 PM

everything I have says 2 to 2 1/2 quarts. Do you have a stock 9", are you filling in the stock hole or has someone welded a filler on the top?

briscoman 07-30-2011 07:32 PM

ford 9.in
 
1976 ford 9 in. mosier center with4.56 bracket car. filler near top on side. Fluid is even w hole and will leave as is.

oldandtired 08-01-2011 01:41 PM

Wrong hole to check level.


All times are GMT -8. The time now is 07:31 AM.