![]() |
16 volt battery
Can anyone please tell me what's involved in changing over from a 12 volt battery to the new 16 volt batterys.
thanks for your time. |
We simply purchased a new battery and charger. We sent out our alternators to Mark Payne and he converted them over to 16 volt. I believe the battery and charger thru Summit Pro Shop is about $450 and you are looking at about $75-$100 to convert an alternator.
|
Shawn, do you run a alternator on the dragster ?
|
Originally Posted by shawnp
We simply purchased a new battery and charger. We sent out our alternators to Mark Payne and he converted them over to 16 volt. I believe the battery and charger thru Summit Pro Shop is about $450 and you are looking at about $75-$100 to convert an alternator.
I am in the middle of trying to decide to swap to 16v or buy another 12v battery choices :shock: |
Originally Posted by andamo
Shawn, do you run a alternator on the dragster ?
|
Re: 16 volt battery
Originally Posted by 63split
Can anyone please tell me what's involved in changing over from a 12 volt battery to the new 16 volt batterys.
I called PowerMaster tech today concerning an alternator with 16 volts and they assured me that I wouldnt need the step down or anything. The alt puts out 18.9 volts and wont hurt anything, you dont get into trouble unless your over 20 volts. I ran the 16 volt last year with no alt and it worked good, but later in the rounds was missing the alt for sure. I just picked up a Powermaster 140 amp alt and should be good to go now... Hope this novel is helpful...lol |
You guys thinking of going to 16v check out this site
http://www.batteriesareus.com/index....x&cPath=65_146 12/16v lite weight deal for 190.00 looks like a great deal Also make sure everything you have is good for upto 19v's before swapping... I'll be sticking with 12v again because of this. hmmm now what 12v to buy ?!? |
Dave,
What do you have that won't work up to 16v? |
Originally Posted by shawnp
Dave,
What do you have that won't work up to 16v? |
For K&R? We were told directly that the 16v would not create any problems with any of the K&R electronics.
|
| All times are GMT -8. The time now is 09:26 AM. |