Racingjunk Forums

Racingjunk Forums (https://www.racingjunk.com/forums/index.php)
-   Help (https://www.racingjunk.com/forums/forumdisplay.php?f=10)
-   -   Need Help In Idenifing BR400 Rod (https://www.racingjunk.com/forums/showthread.php?t=25252)

wlpatterson 08-10-2009 09:32 AM
Need Help In Idenifing BR400 Rod
 
I have a Crower rotating assy (580 CI) which broke a rod,there are no p/ns marked on the rod but the Piston & Crank are Crower-This is a tall deck W/A 4.500 stroke crank. I would think its a 6.535 rod in a talldeck & The # I got from the person I bought them from BR400. These are not H Beam Rods But are the healthest ones I have seen..Any suggestions on identifing these? I can send pictures if you need them-Any help appreciated-

oldandtired 08-10-2009 12:05 PM
Are these aluminum? Sounds like a Brooks part number.
Dave

wlpatterson 08-10-2009 04:21 PM
RODS
 
They are steel

ashbros 08-17-2009 12:51 PM
Originally Posted by oldandtired
Are these aluminum? Sounds like a Brooks part number.
Dave
What confused me was he stated they were not an H beam rod...

Are they Steel or Aluminum..?????

Can you post a picture?

I just checked Brroks does not have a part number BR400.

I am thinking this may be a beefy stock replacement rod..


All times are GMT -8. The time now is 09:21 AM.