Racingjunk Forums
Page 1 of 2
1
2
Show 40 post(s) from this thread on one page

Racingjunk Forums (https://www.racingjunk.com/forums/index.php)
-   Engine Tech (https://www.racingjunk.com/forums/forumdisplay.php?f=9)
-   -   sbc info (https://www.racingjunk.com/forums/showthread.php?t=23205)

chubbyx1 02-22-2009 03:12 PM
sbc info
 
400 sbc i bought from a guy, he never ran it, but the motor is bored 0.60 over i'm wondering if it is to much , and if any body have info on a motor like that and bored that much. block 4 bolt.

hink 02-22-2009 07:06 PM
Have it sonic tested before you go any further!!

zipper06 02-22-2009 08:21 PM
Originally Posted by hink
Have it sonic tested before you go any further!!
X2, i've always thought .040 was pushing the limits.

JMO

Zip.

chubbyx1 02-23-2009 05:50 AM
sbc
 
in any what is the worst case scenario?

suicidebomb 02-23-2009 06:54 AM
Re: sbc
 
Originally Posted by chubbyx1
in any what is the worst case scenario?
Just a WAG on my part, but internal parts, converting to external parts? Hit me with the flame-thrower, I got it coming :!:

chubbyx1 02-23-2009 07:30 AM
sbc
 
I'm new to all of this, sounds like your saying it is going to blow up.

suicidebomb 02-23-2009 08:13 AM
Re: sbc
 
Originally Posted by chubbyx1
I'm new to all of this, sounds like your saying it is going to blow up.
No sir, but you asked for a worst case scenario.

chevynovaman 02-23-2009 08:20 AM
400
 
IS IT STREET DRIVEN OR JUST RACED?

chubbyx1 02-23-2009 08:58 AM
sbc
 
street and race

performanceengin 02-23-2009 10:09 AM
thin cyl. walls and heat can only produce cracks...


All times are GMT -8. The time now is 05:39 AM.
Page 1 of 2
1
2
Show 40 post(s) from this thread on one page