Racingjunk Forums

Racingjunk Forums (https://www.racingjunk.com/forums/index.php)
-   Engine Tech (https://www.racingjunk.com/forums/forumdisplay.php?f=9)
-   -   What this worth for HP? (https://www.racingjunk.com/forums/showthread.php?t=20438)

badrad 04-03-2008 07:58 PM

What this worth for HP?
 
Assuming everything is spot on, BBC 427, Eddy oval heads, Victor Intake, 1050 Dominator, 9.75:1, Comp Cam
286/292 advertised duration
248/254 duration @ .050"
.653"/.660" lift w/1.7 rockers
110 lobe separation angle
106 intake centerline
Plan on NOS possibly.

cepx111 04-03-2008 10:54 PM

New or used? Roller cam or solid? Forged pistons or hyper? What type of crank>forged steel or cast? What type of rods? Need more detials
JMO but the compression seems kinda low for the cam mentioned.
Cp

badrad 04-04-2008 05:45 AM

New set up, the compression is a tad low but I can just use a bigger shot of NOS. Everything is forged and solid roller.

I edited my first post, noticed I was kinda vague.


All times are GMT -8. The time now is 07:15 AM.