powerglide won't go in reverse
I just got my s-10 running today but my powerglide won't go into reverse. It drives great foward but will not engage reverse. I bought it used and don't know much about. It does have a brake but again I don't know much about it. Any clue to what might be happening? Any input would be great. Thanks.
-aaron- |
Is it a Pro brake?
|
Thinking the same thing........If it's a pro brake you will have to set the brake to get it to reverse.......If not you best check you adjustment...
|
Brake
Try putting the Trans in Neutral,and Apply the Trans Brake.You want to have your Foot on the Brake Pedal when you Try this..............?
Later G 8) |
reverse
I agree with the above guys,put it in reverse and push the button. :lol:
|
great, i'll give it a try. thanks.
|
Re: Brake
Originally Posted by bbchevy
Try putting the Trans in Neutral,and Apply the Trans Brake.You want to have your Foot on the Brake Pedal when you Try this..............?
Later G 8) |
Re: Brake
Originally Posted by olds48
Originally Posted by bbchevy
Try putting the Trans in Neutral,and Apply the Trans Brake.You want to have your Foot on the Brake Pedal when you Try this..............?
Later G 8) Later G 8) |
Learn something everyday!
|
good news! that was what it was. thanks a lot guys.
|
Same problem as me mate.I had a tranny built for the first time with a brake.Went to reverse outa my drivway and i had no reverse.I rang my trans builder and what do you know.Push the butten for reverse as long as the gear stick is in nutreal or reverse
|
All times are GMT -8. The time now is 08:09 AM. |