Racingjunk Forums

Racingjunk Forums (https://www.racingjunk.com/forums/index.php)
-   Carburetion, Induction, Nitrous (https://www.racingjunk.com/forums/forumdisplay.php?f=16)
-   -   switching to alcohol (https://www.racingjunk.com/forums/showthread.php?t=32084)

burmie1932 05-06-2012 04:02 PM

switching to alcohol
 
Do you still run the foam in the fuel cell and can I run the return to the other bung on the bottom of the cell?

bbchevy 05-06-2012 04:30 PM

Re: switching to alcohol
 

Originally Posted by burmie1932
Do you still run the foam in the fuel cell and can I run the return to the other bung on the bottom of the cell?

No,and NO!

Later
G 8)

rosameelpito 05-10-2012 07:19 PM

no foam on cell , return has to be on top of fuel cell, alcohol doesnt like alot of timing , probably 28-33 degrees on a bbc depending on motor, start with a fat tune , and go down form there , its safer you may milk oil a little but its better than blowing it ...

SPEEDNEEDS1 05-10-2012 10:31 PM

I am running my first alky set-up this year, my only advice is go with a well known carb. builder "APD, Rupert" being the best in my opinion. Mine is a APD, I took it out of the box, bolted it on and never even adjusted the idle. After I fixed my car issues, it is DEADLY AND I RUN 4 RACES BEFORE OIL CHANGE, just cause I felt guilty. It still looked like new.

APD 419-855-3073 JOHN KYLE

JimmySmith 05-12-2012 05:12 AM

NO & NO Later J.Smith 4621 racing

burmie1932 05-15-2012 05:30 PM

thanks for the help. I will be running a Ron's Toilet on a bb chev


All times are GMT -8. The time now is 07:36 AM.