Racingjunk Forums

Racingjunk Forums (https://www.racingjunk.com/forums/index.php)
-   Engine Tech (https://www.racingjunk.com/forums/forumdisplay.php?f=9)
-   -   SBC 350 (https://www.racingjunk.com/forums/showthread.php?t=33324)

shopper 04-01-2013 02:27 PM

The heads I took off of the motor was shaved to almost the spark plug holes but I don't have ant clue on the CC

hotrod1994 04-01-2013 07:00 PM

take them to machine shop and have the cc volume checked but i think there way to low

64cc head should get ya 10:1 er so...

my world products 64's have plenty of room from the deck of the head to the plug hole

roadkill2 04-02-2013 06:09 AM

Kind of a SWAG but it sounds like somebody with a milling machine had a bad idea and made scrap out of those heads . .

But Hotrod's probably right. Go have them measured . .

TheYellaBrick 04-02-2013 12:49 PM

They could have been from a past 'case of beer' bench racing in a machine shop experiment :shock: 8) 8) :lol: :lol: :oops: :roll:

hotrod1994 04-02-2013 06:45 PM

there had to be at least a case of beer in the man behind the cnc machine :shock:

shopper 04-03-2013 01:00 PM

Sounds good I will take them to a machine shop and see what CC they are, another question this is a roller motor and the #3 & #5 lifters are different than the rest they are rollers but instead of the bar assembly that connects at the top of the two lifters these have like a middle brace between the two lifters and with springs in them, I'm scratching my head on this.

hotrod1994 04-03-2013 01:30 PM

hmmm idk why that would be it seem as if the guy just threw this thing together with spare parts

roadkill2 04-03-2013 02:15 PM


Originally Posted by hotrod1994
hmmm idk why that would be it seem as if the guy just threw this thing together with spare parts

X2 . . . . . A "Handy Grenade" . . Whatever he had handy, he built a grenade out of. . .

shopper 04-03-2013 03:25 PM

Got me thinking the same thing

shopper 04-03-2013 03:29 PM

I really appreciate all you guys input on this motor it sure has help me make a decision


All times are GMT -8. The time now is 04:55 PM.