Racingjunk Forums

Racingjunk Forums (https://www.racingjunk.com/forums/index.php)
-   General Discussion (https://www.racingjunk.com/forums/forumdisplay.php?f=7)
-   -   I'm new.. Let me try this... (https://www.racingjunk.com/forums/showthread.php?t=24286)

prestonoodle 05-17-2009 08:47 PM

I'm new.. Let me try this...
 
I hope this is the right spot for this....I took my 66 stang to the track for the first time. Its got a 289 w/ .030 over forged pistons, stock rods, stock crank, crane 292 dur./512 lift, 1.6 roller rockers, canfield 2.02 heads, RPM intake, eldelbrock 600 carb, hedman long tubes, 4 speed, stock 8" (I know) w/ 4.10's and a mini spool on street tires(I going to get some slicks soon) . I don't know how heavy the car is. I was shifting at 6k and went thru the traps in 4th at 5500. Think I could hit the 12's with slicks? tell me what you think. Thanks Kelly

1st pass Spun 2nd real bad, let off got back on it.
R/T .352
60' 2.040
330' 5.879
1/8 9.022
mph 79.72
1000 11.668
1/4 13.902
mph 101.20

2nd pass Tried small burnout, Still spun 2nd but not as bad
R/T .177
60' 2.166
330 5.873
1/8 8.873
mph 82.60
1000 11.445
1/4 13.625
mph 103.47

Final pass Same as 2nd pass
R/T .147
60' 2.067
330 5.793
1/8 8.818
mph 81.95
1000 11.416
1/4 13.617
mph 102.58

justin45 05-17-2009 08:52 PM

i think a high to mid 12 is very possible but put a 750cfm carb on there cuz i bet ur motors being held back from that 600cfm

THERATTLER 05-17-2009 08:52 PM

:D CAR LOOKS TO RUN PRETTY GOOD FOR WHAT IT IS , BUT THE REACTION TIMES STINK , PROBALLY WOULD STILL BEAT A MOPAR :shock:

kbartley 05-17-2009 09:51 PM

I'M NEW
 
How hard are you leaving and what kind of street tires? Slicks will find the week link. I agree a 750double pumper will help it breath and definitely run faster & quicker but it will also shake the tires loose when you open it all the way(mechanical secondaries). You need both, just don't go w/ too wide of a tire. I had a 74 Nova SS 4-Speed car 400 smallblk. shortrod, dish piston, doublehump's, muncie, 4.10 10bolt back in the 1990's that ran mid 7.80's. Goodyear 10"slick, thats all I could get at the time. Was leaving at 3500rpm & either smoke the clutch or bust a u-joint. Pop told me "LEAVE HARDER", play w/ the tire press., that did the trick. Keep up posted, ask ?'s. Kris

mopar1968 05-17-2009 09:56 PM

I think you might hit 12's - Yeah maybe a neon :!: :!: :!:

''JUST MY TWO CENT'S WORTH''


http://www.racingjunk.com/profile/163312

dparker 05-18-2009 12:22 PM

Re: I'm new.. Let me try this...
 

Originally Posted by prestonoodle
I hope this is the right spot for this....I took my 66 stang to the track for the first time. Its got a 289 w/ .030 over forged pistons, stock rods, stock crank, crane 292 dur./512 lift, 1.6 roller rockers, canfield 2.02 heads, RPM intake, eldelbrock 600 carb, hedman long tubes, 4 speed, stock 8" (I know) w/ 4.10's and a mini spool on street tires(I going to get some slicks soon) . I don't know how heavy the car is. I was shifting at 6k and went thru the traps in 4th at 5500. Think I could hit the 12's with slicks? tell me what you think. Thanks Kelly

1st pass Spun 2nd real bad, let off got back on it.
R/T .352
60' 2.040
330' 5.879
1/8 9.022
mph 79.72
1000 11.668
1/4 13.902
mph 101.20

2nd pass Tried small burnout, Still spun 2nd but not as bad
R/T .177
60' 2.166
330 5.873
1/8 8.873
mph 82.60
1000 11.445
1/4 13.625
mph 103.47

Final pass Same as 2nd pass
R/T .147
60' 2.067
330 5.793
1/8 8.818
mph 81.95
1000 11.416
1/4 13.617
mph 102.58

I you'll look at your last 300' you can see you were slowing down eventhough you were quicker in all the segments in the first 1/8. Your carb is running out of pop, and will probably only get worse as you get quicker. Get a 650 or 750 double pumper Holley carb, it will put you in the 12's.

prestonoodle 05-18-2009 01:32 PM

Thanks for all the tips. I do have a 650 DP that i'm going to try. The tires are 255/55/17 nitto's, plain radials, no D/R's. I going to get some M/T 28/9/15 slicks soon (if I find used even sooner) 10's are to wide to fit in my wheelwell. My reation times do suck but hey, I haven't been to the track in like 12-15 years, give me a little seat time i'll be OK :wink:
Here she is waiting for some body and paint work :P , Oh and I am the 2nd owner, the first was my father, he bought it new in '66.

http://i268.photobucket.com/albums/j...ictures024.jpg
http://i268.photobucket.com/albums/j.../engine005.jpg

THERATTLER 05-18-2009 03:42 PM

:D hey,,,thats a nice little stang :D :D

lively 05-18-2009 07:39 PM

VERY RESPECTABLE :lol: :lol: :lol: :lol:

justin45 05-18-2009 08:54 PM

thats a purty sweet lil stang


All times are GMT -8. The time now is 06:47 AM.