|
Hose Sleeves
Is there a good way to cut these stainless hose sleeves to fit hoses I want tp cover? Hack Saw is not the best.
|
Wrap the point where you want to cut with vinyl tape and cut it with a dremel tool.
|
I wrap mine with duct tape and cut with a cutoff saw. If you use a cutoff wheel on a die grinder or a cutoff saw, go SLOW so you don't catch the braid and unravel it all over. Just eeeeeease through it.
|
Amen on both of those comments... make sure you wrap it tight.
|
Same here, I just wrap the part I need to cut with tape and cut it with a cut off wheel.
Chris |
| All times are GMT -8. The time now is 05:22 AM. |