trans safety
need a flex plate shield and a tranny sheild or blanket for turbo 350, do any of you have suggestions to as brands, space is tight in s10 , but must get these two things to be legal, any good ideas
|
We use tha CSR fiber shield it's all in one and fits really close.
http://www.jegs.com/webapp/wcs/store...10002_44680_-1 Curtis |
http://store.summitracing.com/partde...5&autoview=sku just ordered this flexplate shield, hopefully will fit in there, will get a blanket from tci and will be done
|
By the time you buy a shield and blanket. You can but a JW bell for about the same $$$ No worries of a blanket getting the trans hot, or coming undone. Also hard to see any leaks from the trans. Most of all no clearence problems.
|
drz1972ss wrote:
By the time you buy a shield and blanket. You can but a JW bell for about the same $$$ No worries of a blanket getting the trans hot, or coming undone. Also hard to see any leaks from the trans. Most of all no clearence problems. Bill M |
SFI spec 4.1 for cars running 10.99 and faster SFI spec 30.1 for 9.99 and faster. If your running any slower, no flexplate shield or blanket required.
|
All times are GMT -8. The time now is 08:23 PM. |