Racingjunk Forums

Racingjunk Forums (https://www.racingjunk.com/forums/index.php)
-   Engine Tech (https://www.racingjunk.com/forums/forumdisplay.php?f=9)
-   -   SBC Spreadport headers for 67 CHEVY II (https://www.racingjunk.com/forums/showthread.php?t=31776)

ImBack 03-03-2012 06:56 PM

SBC Spreadport headers for 67 CHEVY II
 
Any suggestions? Has a Heidts front clip with 26" between frame rails and a rack. Been looking for a month without alot of luck.
Hedman makes a #65023 thats says its for a 67-69 Camaro but i found them doing a ChevyII search on their site.

markdunlap 03-04-2012 06:03 AM

SBS spreadport
 
You have a new private message. Look at the top of the page.

JEFF69Z28 03-05-2012 01:59 AM

lemons headers

ImBack 03-05-2012 03:33 AM

Re: SBS spreadport
 

Originally Posted by markdunlap
You have a new private message. Look at the top of the page.

THANKS

ImBack 03-05-2012 03:49 AM


Originally Posted by JEFF69Z28
lemons headers

I was just looking for an off The shelf Header trying to save time and money

zipper06 03-05-2012 08:52 AM

I'm thinking you will have to get fenderwell headers if you want off the shelf. It's hard to get under the frame headers inside a 26" W frame, plus starter interferrance problems. Maybe some S10/sm/blk conversion headers. Hooker makes some fenderwell headers that are 1 7/8" or 2" i think. But they are like $500.00

Zip.

Pwmax 03-06-2012 05:45 AM

Spread Port, meaning like a bigchief style head? If so, good luck. You will need customs. Possibly Lemons has something.

Frank

zipper06 03-06-2012 07:57 AM


Originally Posted by Pwmax
Spread Port, meaning like a bigchief style head? If so, good luck. You will need customs. Possibly Lemons has something.

Frank

He's talking about the heads with Stahl bolt pattern instead of the straight line on most 23* heads.
I THINK.

Zip.

ImBack 03-07-2012 05:56 PM

Yep,the Stahl 7 bolt,bolt pattern. I found some Hedman 65023's when i was on Hedmans website searching for ChevyIIs but when i clicked on them it said they were for 67-69 Camaro???? Their $686 through Jegs uncoated,thats the cheapest ive found,Stahls are $1125 and Lemons$1500

zipper06 03-07-2012 07:58 PM


Originally Posted by ImBack
Yep,the Stahl 7 bolt,bolt pattern. I found some Hedman 65023's when i was on Hedmans website searching for ChevyIIs but when i clicked on them it said they were for 67-69 Camaro???? Their $686 through Jegs uncoated,thats the cheapest ive found,Stahls are $1125 and Lemons$1500

Did you look at the S10/sm/blk conversion fenderwell headers :?: I know they will clear your narrow frame.


Yep i have a set of Lemon's build for a 1980 Malibu under the chassis (2" to 2 1/8" step) the guy i bought them from paid $1350.00 plus $150.00 for the 8 EGT bungs

Zip.


All times are GMT -8. The time now is 10:19 PM.