JOEL AVERY Of HORN LAKE MS. IS A THIEF SCAMMER
I bought a supposed 400 main dart block ready to run from Joel and he shipped me a blown up un usable 350 main block for my 1650.00. He wont return my emails or phone calls and i have begged and pleaded with him to make this right. If anyone knows JOEL AVERY of HORN LAKE Mississippi, 901 921 4610 please point him to this post so he knows hes famous now
|
Did you buy it on RJ ?
Ad number ? |
Yes, the ad is expired now but I have a link:http://www.racingjunk.com/Blocks/263...let-mains.html or 2639583
|
I did send him a note. Let's see if he has anything to say.
looks like he just joined Javery (#635967) Member Since: 2012-06-22 Here is the Ad: Dart Little M block billet mains Ad #2639583 Posted:2012-07-02 14:44:04 This ad has been marked as sold. $1,400.00 Used .030 over Dart little M racing block with Billet mains. Clearenced for 4 inch stroke or 434 cubic inches. Seller Phone Number: 901-921-4610 This item is USED Trades ACCEPTED: Bass boat, ATV, Street bike or mustang, malibu or nova. Payment options: Item Location: HORN LAKE, MS Get Directions To This City Instructions for buyer: $1400 cash price trade value must be atleast $2500. No calls after 9pm. Local pick up only. NO SHIPING. This ad has been marked as sold. |
ad says local pick up , no shipping... did you pick it up in person ?
|
Originally Posted by maniac
ad says local pick up , no shipping... did you pick it up in person ?
|
I don't know a Joel Avery, but i have lot's of fellow racers in North Miss. that may know him, i in fact have a residence up there myself. Looking at the ad i donot see where it says 400 mains, so it must have been verbal. Not taking side either way, but you didn't say what was blown up on the motor :?: I will say that a Dart lil M block with billet mains goes for about $2300.00 depending who you buy it from. Also the 350 main motor is much better than a 400 main motor anytime, not JMO but fact. It sounds like it's a 4.155 bore, it can be bored to 4.180 safely if there are no cracks or damaged area's in the blk. if that's the case i think you got a pretty good deal at $1400.00.
JMO Zip. |
He shipped it to me for 250, thus the 1650. And the 400 main thing was verbal. And when i said blown up, i mean blown up. He sold it (verbally) that is was ready to run. Number 5 main was beat up and wallered out that the main cap and block register was hammered badly, and the main thrust area was actually bbroken and cracked. and someone had peened the block at a feeble attempt to tighten the register back up. an expensive repair and hardly (ready to run" Also obvious evidence of a thrown rod in 7 & 8 area.
|
Originally Posted by dentmagnet
He shipped it to me for 250, thus the 1650. And the 400 main thing was verbal. And when i said blown up, i mean blown up. He sold it (verbally) that is was ready to run. Number 5 main was beat up and wallered out that the main cap and block register was hammered badly, and the main thrust area was actually bbroken and cracked. and someone had peened the block at a feeble attempt to tighten the register back up. an expensive repair and hardly (ready to run" Also obvious evidence of a thrown rod in 7 & 8 area.
Zip. |
No response from him so far either.
Harb, Beast, Mopar, Rabbit ,Maniac and others, maybe y'all should invite him on here too :P |
All times are GMT -8. The time now is 09:57 AM. |