Racingjunk Forums

Racingjunk Forums (https://www.racingjunk.com/forums/index.php)
-   Transmission (https://www.racingjunk.com/forums/forumdisplay.php?f=14)
-   -   Need 5.5" 3 disc in 1 1/8 -26 Spline for GM Richmond Super T-10 (https://www.racingjunk.com/forums/showthread.php?t=1290084)

Uwe 02-12-2017 10:25 AM

Need 5.5" 3 disc in 1 1/8 -26 Spline for GM Richmond Super T-10
 
Dear Racing Junkies,

does someone know where to get 5.5" disc with 1 1/8" - 26 spline input ?

Got a Quartermaster with 1 1/8-10 spline but want me to buy a new transmission like a Richmond super t 10 or a Jerico.

Quartermaster has only 1 5/32 - 26 spline 5.5" 3 disc
Tilton only 1 1/8"-10 Spline in 5.5"

Any help is welcome.

Uwe 03-28-2017 10:07 AM

1 Attachment(s)
Dear Racing Junkies :-)

Nobody could help me ,so far.
Now i found out that 1 1/8"-26 and 1 5/32-26 spline is the same size of input shaft.Known as GM 26 spline.
After weeks of research i found this.
[ATTACH=CONFIG]185[/ATTACH]

Not even Summit,ACE Clutches, Richmond gear,JEGS and some E-bay dealers could help me and just said get a 1 5/32-26 and you are fine :-)

I hope this info helps someone else as well.


All times are GMT -8. The time now is 07:21 PM.