Racingjunk Forums

Racingjunk Forums (https://www.racingjunk.com/forums/index.php)
-   Transmission (https://www.racingjunk.com/forums/forumdisplay.php?f=14)
-   -   trans safety (https://www.racingjunk.com/forums/showthread.php?t=17540)

spib 06-12-2007 08:11 AM
trans safety
 
need a flex plate shield and a tranny sheild or blanket for turbo 350, do any of you have suggestions to as brands, space is tight in s10 , but must get these two things to be legal, any good ideas

curtisreed 06-12-2007 09:43 AM
We use tha CSR fiber shield it's all in one and fits really close.

http://www.jegs.com/webapp/wcs/store...10002_44680_-1

Curtis

spib 06-12-2007 12:42 PM
http://store.summitracing.com/partde...5&autoview=sku just ordered this flexplate shield, hopefully will fit in there, will get a blanket from tci and will be done

sc3314 06-19-2007 09:12 PM
By the time you buy a shield and blanket. You can but a JW bell for about the same $$$ No worries of a blanket getting the trans hot, or coming undone. Also hard to see any leaks from the trans. Most of all no clearence problems.

sp2816 06-20-2007 09:28 AM
drz1972ss wrote:
By the time you buy a shield and blanket. You can but a JW bell for about the same $$$ No worries of a blanket getting the trans hot, or coming undone. Also hard to see any leaks from the trans. Most of all no clearence problems.
The JW ultrabell is for protection of the flexplate area, but it still requires the blanket or transmission shield for the planetaries.


Bill M

sc3314 06-24-2007 05:27 AM
SFI spec 4.1 for cars running 10.99 and faster SFI spec 30.1 for 9.99 and faster. If your running any slower, no flexplate shield or blanket required.


All times are GMT -8. The time now is 10:10 AM.