Racingjunk Forums

Racingjunk Forums (https://www.racingjunk.com/forums/index.php)
-   Body Work & Projects (https://www.racingjunk.com/forums/forumdisplay.php?f=11)
-   -   My second LUV... (https://www.racingjunk.com/forums/showthread.php?t=1289969)

mytmouz 08-25-2018 07:55 PM

And... I painted it yesterday,finally...

http://i.imgur.com/8Ah8kIWl.jpg

mytmouz 09-02-2018 07:29 PM

And while it doesn't look like much, it took all day to do it...

Cut a piece of anodized diamond plate to fit, mounted the through bolts with countersunk screws to hold the bed sides at the bottom, then mounted the access doors for the battery and fuel fill. Then masked off and bedlined the bed sides, tail gate, and front bed panel. Then installed the stainless bolts for the bed side fenders. Also, not shown, but the new chains for the tail gate are on as well...

http://i.imgur.com/G6uBZYTl.jpg

Swiley383 09-03-2018 06:38 PM

Looks good

mytmouz 09-17-2018 06:33 PM

http://i.imgur.com/OR11l7ll.jpg

mytmouz 09-22-2018 06:17 PM

Reinstalled the dash today, built out and refinished the 68 Camaro console, reworked the trans tunnel to make removing the trans easier in the future, and installed both the bumpers...

http://i.imgur.com/R4fQn91l.jpg

http://i.imgur.com/PIRhYBNl.jpg

Harbone 09-23-2018 04:43 AM

That is awesome!

mytmouz 10-06-2018 06:33 PM

http://i.imgur.com/NeyhWyal.jpg

http://i.imgur.com/g4lUK7Yl.jpg

mytmouz 10-13-2018 07:16 PM

For today's update, I installed the rear view mirror and visors, trimmed the console to fit, and installed it, and installed the console gauge pod and gauged, and fabbed up a gauge panel for the dash. The reason for this, is I didn't like the digital gauge set up i had, it just didn't fit the theme of the build i was going for. The fuel gauge doesn't work, and didn't on the other set up, got to trace that out, and although the new gauges were to come with senders, mine didn't have a temp sender. The oil pressure gauge didn't work with the sender for the other set up, so i hope that is the case for the temp gauge as well...

http://i.imgur.com/iB6pMMgl.jpg

The dash panel is aluminum, and in this pic, is just roughed in, I ran out of time for the day. I am going to brush it, but if it is still shiny, I will paint it black...

http://i.imgur.com/WHOnS0al.jpg

mytmouz 10-13-2018 07:16 PM

For today's update, I installed the rear view mirror and visors, trimmed the console to fit, and installed it, and installed the console gauge pod and gauged, and fabbed up a gauge panel for the dash. The reason for this, is I didn't like the digital gauge set up i had, it just didn't fit the theme of the build i was going for. The fuel gauge doesn't work, and didn't on the other set up, got to trace that out, and although the new gauges were to come with senders, mine didn't have a temp sender. The oil pressure gauge didn't work with the sender for the other set up, so i hope that is the case for the temp gauge as well...

http://i.imgur.com/iB6pMMgl.jpg

The dash panel is aluminum, and in this pic, is just roughed in, I ran out of time for the day. I am going to brush it, but if it is still shiny, I will paint it black...

http://i.imgur.com/WHOnS0al.jpg

mytmouz 11-04-2018 05:02 PM

Going old skool! And what a PITA to cobble together in this little truck... MUCH quieter than the Purple Hornie headers mufflers that were on it...

http://i.imgur.com/WI1c33Cl.jpg


All times are GMT -8. The time now is 02:25 AM.