Racingjunk Forums

Racingjunk Forums (https://www.racingjunk.com/forums/index.php)
-   Tire, Wheel, Brake (https://www.racingjunk.com/forums/forumdisplay.php?f=17)
-   -   MOUNTING SLICKS (https://www.racingjunk.com/forums/showthread.php?t=29725)

RAPPTOR23 01-28-2011 02:09 PM
MOUNTING SLICKS
 
I HAVE 14/32/15 GOOD YEARS. CANNOT GET THEM TO RELEASE FROM THE RIM. HAD THEM TO 5 TIRE STORES,NO LUCK.. KNOW ANY WAY OR TRICKS TO BREAK THE BEADS?

TheYellaBrick 01-28-2011 04:05 PM
Take the bead screws out ? :roll: :roll: :D :D :D :D :D :oops: :oops: :oops: :oops: Just goofing !! :D :D
Did the tire shops try breaking the bead WITH air in the tire ? No pressure allows that floppy sidewall to collapse before enough force can be applied to bust the bead.

RAPPTOR23 01-29-2011 05:15 AM
TIRES
 
Originally Posted by DrivingMissDD
Take the bead screws out ? :roll: :roll: :D :D :D :D :D :oops: :oops: :oops: :oops: Just goofing !! :D :D
Did the tire shops try breaking the bead WITH air in the tire ? No pressure allows that floppy sidewall to collapse before enough force can be applied to bust the bead.
LOL.. YA.IT SURE LOOKED LIKE THE SCREWS WERE LEFT IN.. THE ONLY WAY ONE OLD TIRE CAME OFF WAS THE BIG TRUCK HAMMER .. CANT DO THAT ON A 600.00 DOLLOR BILLET RIM.. THANKS

badrat1430 03-06-2011 08:15 AM
I cut the side wall and carfully used a die grinder with a small bit to cut the bead--- better than beating it with a hammer :)

outlaw256 03-31-2011 03:31 AM
those must be some strong sidewalls, mine fall off when they dont have air.

hammertime 03-31-2011 05:27 AM
Originally Posted by badrat1430
I cut the side wall and carfully used a die grinder with a small bit to cut the bead--- better than beating it with a hammer :)
x2 :)

hammertime 03-31-2011 05:28 AM
Originally Posted by outlaw256
those must be some strong sidewalls, mine fall off when they dont have air.
I hope not ?? A low tire shouldnt fall off the bead that easy :?:


All times are GMT -8. The time now is 01:39 PM.