Powerglide pump
Once a powerglide pump has been made to accept a turbo spline input shaft, can a powerglide spline input shaft be put back into the pump?
TS1955 |
You can put the glide shaft right back in with no other changes. the diference is the busging that goes in the end of the stator shaft to support the turbo shaft. You can remove the bushing, but it is not nesecary because the glide shaft is smaller diamater and will not toutch the bushing.
Rob |
Originally Posted by Robstclair
You can put the glide shaft right back in with no other changes. the diference is the busging that goes in the end of the stator shaft to support the turbo shaft. You can remove the bushing, but it is not nesecary because the glide shaft is smaller diamater and will not toutch the bushing.
Rob TS1955 |
All times are GMT -8. The time now is 02:25 AM. |