gearhead1011 |
06-04-2008 05:34 AM |
On a fox body it'll use a rear sump pan. The tube would be on the left (driver's) side about 1/2 way back. If it's a post-1980 block it will be in the block just above the pan rail if it's an older block it will be in the side of the oil pan. if someone used a newer style pan with the older block there will be no provision for the tube. It may have an older timing cover with a place for a tube in the lower right (passanger) side. You will not be able to use this if it does have one because the sump is in the rear and that location is for the older front sump pan and you won't get an accurate read on the oil level with the rear sump pan. I hope I didn't confuse anyone.
|