Racingjunk Forums

Racingjunk Forums (
-   Help (
-   -   Hose Sleeves (

jreiley 08-11-2010 03:49 PM

Hose Sleeves
Is there a good way to cut these stainless hose sleeves to fit hoses I want tp cover? Hack Saw is not the best.

fla1976 08-11-2010 05:00 PM

Wrap the point where you want to cut with vinyl tape and cut it with a dremel tool.

TheYellaBrick 08-11-2010 06:18 PM

I wrap mine with duct tape and cut with a cutoff saw. If you use a cutoff wheel on a die grinder or a cutoff saw, go SLOW so you don't catch the braid and unravel it all over. Just eeeeeease through it.

Scooterz 08-12-2010 01:13 PM

Amen on both of those comments... make sure you wrap it tight.

bowtie4542001 08-12-2010 06:34 PM

Same here, I just wrap the part I need to cut with tape and cut it with a cut off wheel.


All times are GMT -8. The time now is 09:16 AM.