Racingjunk Forums

Racingjunk Forums (https://www.racingjunk.com/forums/index.php)
-   Carburetion, Induction, Nitrous (https://www.racingjunk.com/forums/forumdisplay.php?f=16)
-   -   FUEL LINE FITTINGS (https://www.racingjunk.com/forums/showthread.php?t=27473)

JEFF69Z28 02-25-2010 02:47 AM

FUEL LINE FITTINGS
 
WHAT CAN I PUT ON THE FITTINGS GOING TO AND FROM MY FUEL FILTER AND PUMP TO STOP IT FROM LEAKING?

TS1955 02-25-2010 05:18 AM

I use liquid thread sealant. Permatex #56521 and NAPA #765-2681.

TS1955

kwkracing 02-25-2010 08:04 PM

Haha, a wrench and tighten them! what kind of fittings are leaking?

JEFF69Z28 02-26-2010 03:35 AM

3/8X8AN INTO FILTER AND PUMP AND OUT.
ANOTHER ? PUMP FIRST OR FILTER

markdunlap 02-26-2010 05:58 PM

fuel line fittings
 
Check out Aeromotive tech specs some time. They want a 100 mesh filter before the pump to protect it without cavitating it and a 10 mesh filter before the carb to protect needle and seat.


All times are GMT -8. The time now is 06:26 PM.