Racingjunk Forums

Racingjunk Forums (https://www.racingjunk.com/forums/index.php)
-   Carburetion, Induction, Nitrous (https://www.racingjunk.com/forums/forumdisplay.php?f=16)
-   -   very simple question for you experts (https://www.racingjunk.com/forums/showthread.php?t=27357)

ejm 02-14-2010 05:23 AM

very simple question for you experts
 
holley fuel pump what is the actual fittings that go into the pump? an???? not that familar with the an fittings thanks

kbartley 02-14-2010 06:09 AM

fuel pump
 
not sure which pump you have but a good many of the holley pumps take 3/8 NPT and then there are some that take 1/2" NPT.

ejm 02-14-2010 08:00 AM

its a holley blue electric

MEMRACING62 02-14-2010 08:13 AM

MY HOLLY BLUE IS 3/8 NPT(PIPE THREAD)

bowhay 02-14-2010 08:20 AM

X2
3/8 npt

ejm 02-14-2010 09:44 AM

so any pipe thread 3/8 will work ? i have been using 3/8 brakeline any way to tie into that or just put a nipple on and put a rubber splice?

kwkracing 02-15-2010 12:34 PM

Your asking two diff questions now. A 3/8 brake line will not fit a 3/8 npt, a pipe thread has a tappered thread pitch. Are you asking if you can use 3/8 brake line as the fuel line? Sure, if you attach some sort of 3/8 hose in between or find two 3/8 inverted flare bushings to put in ur pump.

gnsrule 02-15-2010 01:53 PM

AN fittings are the tapered seal, streight thread fittings commonly used on the fancy red and blue fittings and anything also commonly reffered to as JIC.

ejm 02-26-2010 01:32 PM

thanks for clearing up!!!!!!!!!1


All times are GMT -8. The time now is 04:56 PM.