engine oil dip stick
trying to get a oil dip stick for a 85-96 chevy 350 that is on right side of motor. for a s-10. go to dealer and they need to know what the application is for. got a chrome one from a speed shop and it leaks. any help. thanks
|
Any should work. I'd just tell them it's for a C1500 to keep it simple....
|
dip stick
all tubes are two long . all i need is a tube 6-9 inch. long
|
put silicone around the chrome and put it back in.. :D
|
tried that. chrome ones are to tight. tried to grind off some chrome with silicone now it leaks. would like to find one from general motors and try it.
|
On my motor I had to put a o-ring on the shoulder of the dipstick tube where it goes into the pan and then silicon the hell out of it. Now its dry as a popcorn fart down there now.
Cp |
Is it blowing the dipstick out? Or leaking where it goes in the block at the bottom?
|
just leaking.
|
Pull out the dipstick and put a freezeplug in the hole. I have a site pulg in the side of my oil pan and with this setup no leaks!!!!!
|
where do you get a freese plg that small? the hole is 27/64". thanks
|
All times are GMT -8. The time now is 06:53 AM. |