Racingjunk Forums

Racingjunk Forums (https://www.racingjunk.com/forums/index.php)
-   General Discussion (https://www.racingjunk.com/forums/forumdisplay.php?f=7)
-   -   Rear end for a 92 v8 S10 (https://www.racingjunk.com/forums/showthread.php?t=31457)

Frankracing 12-27-2011 05:52 PM

Rear end for a 92 v8 S10
 
Does anybody know what is a good Strong Rear end that will fit good for this Truck ? Its a Real nice 355 Truck. Might want to Drag it now & then. Has a 10 bolt posi. Chevy Rear, Forgot what they call it. But I have heard its not Good !!! Thanks for any & all help !!

lively 12-27-2011 05:54 PM

it is a govelock-----TOTAL JUNK AS SOON AS YOU GET BITE

RUNNING SLICKS--go to a well setup 10bolt/9 inch ford/ or 8 3/4 chrysler

dragonmaster093 12-27-2011 07:00 PM

i beleive nova and older camaros will bolt up i that helps

outlaw256 12-28-2011 05:00 AM

RUN A BIG BEARING FORD 9 .PARTS ARE PLENTIFUL AND CHEAPER THAN CHRYSLER 8 3/4. BOTH ARE STOUT REAR ENDS STRAIGHT FROM THE FACTORY!

spib 12-28-2011 08:24 AM

have a good rear end narrowed down, your only as strong as your weakest link I used to run a 8 3/4 mopar with 30spline moser axels, my wifes s10 has my third member and she now has a another mopar, my s10 blazer now has a dana 60 40 spline and of course a ford 9" would be a good choise and a good strong 12 bolt chev would also work

TheYellaBrick 12-28-2011 09:00 AM

My moto is "OVERBUILD!"

:D :D :D

spib 12-28-2011 11:14 AM


Originally Posted by DrivingMissDD
My moto is "OVERBUILD!"

:D :D :D

x2

outlaw256 12-29-2011 05:09 AM

mine too DD, i rather spend some now than alot later.took me awhile to fiqure that one out but it works lol

hogzilla89 01-13-2012 11:24 AM

s10 rear
 
the 8.8 explorer rear is a good swap also.

lookingaround 01-13-2012 12:29 PM

Re: s10 rear
 

Originally Posted by hogzilla89
the 8.8 explorer rear is a good swap also.

X2...you can get one with a 4.10 gear and limited slip for around 125 at a pull a part junk yard


All times are GMT -8. The time now is 03:36 PM.