copper headgaskets, sealer?
What is your favorite sealer for the water passages when using copper head gaskets?
|
Some copper gaskets already have a sealer on them, But for the ones that do not, I use Coppercoat from Permatex.
TS1955 |
I used to use GM sealing compound with very good success I don't know if it still is available though
|
Gasket sealer
I've had good luck with Hylomar gasket sealer. It was recommended by an area performance engine builder. There are plenty out there. I would use coppercoat if I couldn't find Hylomar.
|
Permatex black silicon
|
Originally Posted by TS1955
Some copper gaskets already have a sealer on them, But for the ones that do not, I use Coppercoat from Permatex.
TS1955 |
thanks guys, I have used all the above with varied sucess except Hylomar ....I remember seeing an add somewhere for a sealer expressly for this but cant remember what or where.....getting old i guess.....
please keep the recomendations comming....maybe seeing the name will jog my memory Thank you Robert A. |
Sealant
Here is a website wth some info on Hylomar:
http://www.hylomar-usa.com/?kc=6NbrC...FVCF7Qod5SkOFQ |
Copper coat, spray on.
Zip. |
All times are GMT -8. The time now is 02:38 AM. |