Racingjunk Forums

Racingjunk Forums (https://www.racingjunk.com/forums/index.php)
-   Engine Tech (https://www.racingjunk.com/forums/forumdisplay.php?f=9)
-   -   bbc heads? (https://www.racingjunk.com/forums/showthread.php?t=31485)

mwbrasher 01-25-2012 09:03 PM

great...thanks for clearing that up... we are cool... just wan't to race... just like every one here.... :D

TheYellaBrick 01-26-2012 07:38 AM

Racin', roddin', and renchin', is all about turnin' and lernin'.

:shock: :shock: :roll: :roll: :oops: :oops: :oops:

bixblk 02-02-2012 06:58 PM

496 bbc
 
I got a great deal on a BBC apart for inspection,it should make 750 plus HP alum dart heads, great pieces for a great price
check out my Ad #2460715 $3800.00
Dart, eagle, comp, freshly machined block, ready to go Check it out
You can put it together and have a boat load of HP for cheap money
Call if interested or if you have any questions
jeff M 708-308-0282

burgessdg 03-09-2012 08:02 PM

BBC heads
 
What's wrong with a set of Rect port closed chamber factory heads? I have never seen a flow bench test on those old heads, but nobody can tell me oval port heads flow better than the old L88 heads without showing me some flow bench data to prove it. I too ran 10's with an L88 .60 over in a Nova. 488 gear, tunnel ram w 2-600 holleys. Those heads were on all high HP BBC 65-70, they should be plentiful.

waynesworld154 10-25-2012 08:59 AM

just a thought i run a 427 closed chamber motor cast head 291 have 320 runners from factory have a 2700lb car and run 5.90 115mph so dont give up on cast heads yet u can make plenty of pwer with cast heads just my opinion thanks

oldandtired 10-29-2012 12:23 PM

The closed chamber "bathtub heads" required a lot of work and then they still would not flow well in the upper RMP range. They were "OK" for a 396/427 but not for anything larger.

Too much valve to head chamber flow interference.

JMO


All times are GMT -8. The time now is 06:24 PM.