trans cooler
 

how big of trans cooler do I need for my street strip car (sbc th-350)

the bigger the better

can you and would it help to tie and tee two coolers together.
Andy

I would just use the B&M cooler with fan 70297 or 70298 they do a great job on the street or track.

B&M coolers are what I use


but I found in the last 2 weeks this info .. B&M dont even make them, Long Coolers out of Canada does... you can buy the same cooler without the B&M name for cheaper. Long Tru Cool do a search on them

thanks for the tip.

I wouldn't waste my time with one of those Moroso long tube type ones with fins. Get an aluminum radiator type one. Mines about 2inches thick, 18 inches long, 10 inches high. Does the job on my Nova with a glide launching with pro transbrake at 4500rpm, big block engine spinning out to 8200rpm.

A old A/C condenser works like a top too.

Heck run 2 of them if you have room, the more the marrier