Racingjunk Forums

Racingjunk Forums (https://www.racingjunk.com/forums/index.php)
-   Engine Tech (https://www.racingjunk.com/forums/forumdisplay.php?f=9)
-   -   350hp sbc 1/4 mile help (https://www.racingjunk.com/forums/showthread.php?t=30694)

hotrod1994 07-14-2011 07:38 PM

350hp sbc 1/4 mile help
 
what do you think would be better for a 1/4 mile time
its a stock bottom end 350 that should make about 340-360 hp
im gonna redline it at 5750-6000 rpm
s gonna be running 29x12.5x15 m/t sportsman
what kind of gear do you guys think i should run
i was leaning towards 4.10 i was just gonna change gears in the existing rear end but i found out it was welded posi so i dont wanna dick with it
i can get a posi 8.5 gm with 3.73 for 350 bucks

what i wanna know is how hard will it leave with 3.73 vs the 4.10's
i would like a good hard launch and for it to be quick off the line
it;s in a 76 camaro with a th350 with b@m mega shifter 2000 stall and a stage 2 shift kit
thanks

fast75vega 07-15-2011 10:35 AM

i think that stall is gonna kill your off the line with any gear..... :wink:

hotrod1994 07-15-2011 11:37 AM

ok what kind of stall would you suggest with it still being street able it will be cruzed 15 mile to the nearest town often

fast75vega 07-15-2011 03:20 PM


Originally Posted by mrbigtrucks
ok what kind of stall would you suggest with it still being street able it will be cruzed 15 mile to the nearest town often

ive ran 2500 to 3500 on my street rides with out any problems


All times are GMT -8. The time now is 10:07 PM.