Racingjunk Forums

Racingjunk Forums (https://www.racingjunk.com/forums/index.php)
-   General Discussion (https://www.racingjunk.com/forums/forumdisplay.php?f=7)
-   -   Our season starts this week end (UPDATE) (https://www.racingjunk.com/forums/showthread.php?t=20377)

qtrmile2 03-27-2008 04:45 PM

Our season starts this week end (UPDATE)
 
Leaving tomorrow and headed for Gateway to run the NHRA open event.
I'll be running S/ST. Can't wait to dump the clutch :wink:
I thought it would never get here. :D

Just wanted to let you know how I did this week end at the track. I put a set of wheelie bars on for this year. What happen was I couldn't raise them up high enough. If I raised them up higher they would of bent the lower valance panel. I'm going to notch the lower valance panel for the bars to clear. What happen was the bars come down and lift the rear tires off the surface and spin the tires.
It's hard to dial the car in when it's spinning. I went out first round. I cut a
.050 light and ran a 11.00. The other guy cut a .034 and ran a 10.91. The car spun real hard and slowed down. No excuses though. I'll have it fixed next time out :wink:
[/img]

hotrod1024 03-27-2008 04:50 PM

Good luck Vince and have a safe time.Let us know how it goes.Sure wish I could see that camaro run in person.LOL.Randy.

topcat572 03-27-2008 05:14 PM

new season
 
Good luck, heading to our first of the year too. :D

mytmouz 03-27-2008 05:53 PM

Good luck...

rsrsfishslayers 03-28-2008 08:14 PM

Good luck Vince do a wheel stand for me.
CPT.RON 8) 8)

sg5492 03-29-2008 07:45 PM

Good luck Vince!!

rsrsfishslayers 03-31-2008 07:24 PM

Oh poor guy. Having trouble do a wheel stand . Send it out here Vince and I will send you the mustane. Sounds like a good trade :D :D :D
CPT.RON

slowmotion 04-01-2008 02:58 AM

Here's a pic of a stocker that Bret Kepner posted on www.stlsr.com from this weekend.

http://i28.photobucket.com/albums/c2...03-30_006A.jpg

Tod74 04-01-2008 05:16 AM

I thought they had wheelie bars that actually pushed down on the rearend to plant the tires harder as they hit....

qtrmile2 04-01-2008 02:38 PM


Originally Posted by Tod74
I thought they had wheelie bars that actually pushed down on the rearend to plant the tires harder as they hit....

I know him that's Fred. Super nice guy. Him and his son were there running B/SA. I was there when he did that. His bars bend alot when the front end went up. They also have springs that make the bars more forgiving and bend like you see here.
My bars don't have springs and are very stiff but adjustable. I couldn't raise them high enough so the tires unloaded and started to spin on the lauch. On that pass Fred lifted and tore alot of stuff up. Like I always say don't lift in first gear. Funny thing is hours befroe that pass we talked about not lifting. It's a whole lot different when your in the car.


All times are GMT -8. The time now is 05:45 PM.