Brodix 10x heads
 

Do these heads require shaft rockers or can stud rockers be used?

They require shaft rockers plus offset lifters too.

TS1955

X2, they require .250 offset rockers and .180 offset int. lifters. I have a set on my injected 434". They are Brodix 10's with RP's and FP's. I have T&D's i could look up the PN# if you need it. When i was setting mine up i called Brodix and they wouldn't give me the answer, they just said send us the heads and we'll set them up, yah right :!: :!: (NOT), since they are dealers of all the shaft rockets. I had a friend with set of .250 offset 1.6's T&D's which he sent me if they would work i could have them for $600.00, they were perfect. Problem is that they are the best 23* heads out there, they only flow about 320 CFM fully ported mine flow 314 @ .600 lift where the AFR 235's flow more fully ported.

Zip.

http://img.photobucket.com/albums/v5...2/100_0735.jpg

The reason I ask is I have a set of AllPro 220's that require shaft rockers. I also have ss rockers on my really old set of Brodix heads. I was thinking of buying the 10x if I didn't have to by the shaft rockers and new lifters. This hobby is getting really expensive. Current engine is little m 406.

The set of Brodix 10's that i have are the older version, i really don't know if the 10 X's have the same valve layout, but i can tell you that you will not get a straight answer from Brodix.

Zip.

[quote="zipper06"]X2, they require .250 offset rockers and .180 offset int. lifters. I have a set on my injected 434". They are Brodix 10's with RP's and FP's. I have T&D's i could look up the PN# if you need it. When i was setting mine up i called Brodix and they wouldn't give me the answer, they just said send us the heads and we'll set them up, yah right :!: :!: (NOT), since they are dealers of all the shaft rockets. I had a friend with set of .250 offset 1.6's T&D's which he sent me if they would work i could have them for $600.00, they were perfect. Problem is that they are the best 23* heads out there, they only flow about 320 CFM fully ported mine flow 314 @ .600 lift where the AFR 235's flow more fully ported.

Zip.

http://img.photobucket.com/albums/v5...2/100_0735.jpg[/quote
Zip how long are those header studs?