Racingjunk Forums

Racingjunk Forums (https://www.racingjunk.com/forums/index.php)
-   User Feedback & Scammer watch (https://www.racingjunk.com/forums/forumdisplay.php?f=8)
-   -   BEWARE SCAMMERS IN REIDSVILLE NC (https://www.racingjunk.com/forums/showthread.php?t=32516)

a2180turbo 08-20-2012 07:31 AM

BEWARE SCAMMERS IN REIDSVILLE NC
 
Took my car to get some work done to R AND D Race cars in Reidsville NC and they kept my car forever and gave me a outrageous bill that I paid in full. 5 years into this and my car is not finish and the work thats been done looks like shit. Now the refused to finish the work and I had to take matters to a higher level. Beware of these scammers!!!!!!!!!

Harbone 08-20-2012 07:54 AM

Are they a Racing Junk member??

a2180turbo 08-20-2012 10:31 AM

Re: BEWARE SCAMMERS IN REIDSVILLE NC
 

Originally Posted by a2180turbo
Took my car to get some work done to R AND D Race cars in Reidsville NC and they kept my car forever and gave me a outrageous bill that I paid in full. 5 years into this and my car is not finish and the work thats been done looks like s. Now the refused to finish the work and I had to take matters to a higher level. Beware of these scammers!!!!!!!!!


yes they are a Racing Junk Member

Harbone 08-20-2012 10:48 AM

Did you have them put it all in writing before paying them and waiting 5 years?

Scooterz 08-20-2012 03:44 PM

Sorry to hear about this. What kind of work was done? What happened to the work they completed... what was done wrong?

bjuice 08-30-2012 07:28 PM

Give us the names etc...or copy and paste member thread...thanks


on a personal Note I swear to GAWD if I ever needed chassis work done again that's considered major I will buy a 220 miller and go at it and screw it up enough until its right..or buy someones else stuff.


Screw these Rip Off Chassis builders prices..I know it takes talent and its work WHEN YOU WORK..Trust me there is a bunch of DOWN time I have whitnessed from many reputable and Non Reputable chassis builders and you are getting charged for...if you can Measure , have a decent mechanical mind and the tools you can do most of your own stuff...

Three golden Rules to Follow:
1- Don't Cut it too short
2- remember its only metal you can grind it off and start over.
3- Be patient

If you have never welded before and no one around to show you..take a 6 week night/weekend welding certificate course at a local tech school you will have enough to go from there.... :D


All times are GMT -8. The time now is 06:44 AM.