Racingjunk Forums - Two Quick Questions...

Racingjunk Forums (https://www.racingjunk.com/forums/index.php)

- Engine Tech (https://www.racingjunk.com/forums/forumdisplay.php?f=9)

- - Two Quick Questions... (https://www.racingjunk.com/forums/showthread.php?t=23052)

Two Quick Questions...

1)Is it true PBM HYDRAULIC ROLLER LIFTERS are made by (MADE BY MORREL)...exact same unit in a different box?

2)ERSON cams/springs/locks...feedback?

Thanks >learning something new every day.

Re: Two Quick Questions...

Quote:

Originally Posted by HamerDown

1)Is it true PBM HYDRAULIC ROLLER LIFTERS are made by (MADE BY MORREL)...exact same unit in a different box?

2)ERSON cams/springs/locks...feedback?

Thanks >learning something new every day.

I know the roller lifters are made by Morel for PBM, just got a new set last week (5th set all top notch)

Erson is good stuff, Erson is owned by PBM, Manley makes the Erson springs but usually $40-50 less a set then the Manleys. Not sure who makes the cams for them but have ran it for 2 years in my 582 good stuff also. Just ordered a new set of Erson Springs, to my door $252.00 Manley price was above $300 same spring.

Re: Two Quick Questions...

Quote:

Originally Posted by hammertime

Quote:

Originally Posted by HamerDown

1)Is it true PBM HYDRAULIC ROLLER LIFTERS are made by (MADE BY MORREL)...exact same unit in a different box?

2)ERSON cams/springs/locks...feedback?

Thanks >learning something new every day.

Thanks for the reply...so it would be a safe bet to say the PBM hyd roller specks out to be exact as the rollers in a Morrel box.
Any feedback on if Manly 4340 H-beam rods are the same as Engine-Pro...just a different box?
interesting stuff to say the least.