anyone run their hot rod on e85
 

what does it take to run a mild sbc 9.5:1 mild cam 1.94 heads on e 85 just looking into it

thanks logan

Far as I know, you have to have the correct gaskets and "O" rings in your fuel delivery system, and of course, proper jetting . .

There's guys that come up here that's a lot smarter on Alky carbs than I am . . I have always worked with straight Methanol or Ethanol through an Enderle injector . . Dunno much about carbs, yet . . But I'm learning . .

It gets a bunch simpler when you use a Throttle Body Setup or something similar. You let the computer figure it all out . .

http://raceone85.com/

http://www.e85forum.com/forum-1.html

http://www.horsepowerinnovations.com/product.html

http://www.marksullense85carburetors.com/

http://www.e85carbs.com/

ok thanks

All you need is an E85 Carburetor.

E85 is more corrosive, so you will have to maintenance your fuel system a little more often.