Dart 355 CNC heads, stud girdle, & Crower rocker arms
What I am looking for is opinions on a set of Dart 355 CNC heads that I have so I know what they are worth. I bought these new from Reher-Morrison in April 2007 and they have 40-50 passes on them. They have 2.300 and 1.88 SS valves, 3/8 inch guide plates, and Manley Nextec springs set up for .800 lift. I am also including the Reher-Morrison stud girdle and a set of Crower 1.7 ratio stainless steel rocker arms that were put on my engine the same time as the heads. The heads have never been hurt and they are still on my engine, but I am changing my engine program for next year and would like to sell. What is the heads, stud girdle, and rockers worth? Thanks for your input. :D
|
Re: Dart 355 CNC heads, stud girdle, & Crower rocker arm
Originally Posted by tcarda
What I am looking for is opinions on a set of Dart 355 CNC heads that I have so I know what they are worth. I bought these new from Reher-Morrison in April 2007 and they have 40-50 passes on them. They have 2.300 and 1.88 SS valves, 3/8 inch guide plates, and Manley Nextec springs set up for .800 lift. I am also including the Reher-Morrison stud girdle and a set of Crower 1.7 ratio stainless steel rocker arms that were put on my engine the same time as the heads. The heads have never been hurt and they are still on my engine, but I am changing my engine program for next year and would like to sell. What is the heads, stud girdle, and rockers worth? Thanks for your input. :D
Here is a topic on drr about same heads same type of topic http://drr.infopop.cc/eve/forums/a/t...483#7601023483 |
Heads?
Like the Fellow on the Link!
I woul;d give 2-Grand!!! Especially if they are like 108cc? Thats what i need for this Alky Deal,these 120cc Heads are Killing my Compression! Later G 8) |
Re: Dart 355 CNC heads, stud girdle, & Crower rocker arm
Originally Posted by tcarda
What I am looking for is opinions on a set of Dart 355 CNC heads that I have so I know what they are worth. I bought these new from Reher-Morrison in April 2007 and they have 40-50 passes on them. They have 2.300 and 1.88 SS valves, 3/8 inch guide plates, and Manley Nextec springs set up for .800 lift. I am also including the Reher-Morrison stud girdle and a set of Crower 1.7 ratio stainless steel rocker arms that were put on my engine the same time as the heads. The heads have never been hurt and they are still on my engine, but I am changing my engine program for next year and would like to sell. What is the heads, stud girdle, and rockers worth? Thanks for your input. :D
|
Re: Heads?
Originally Posted by bbchevy
Like the Fellow on the Link!
I woul;d give 2-Grand!!! Especially if they are like 108cc? Thats what i need for this Alky Deal,these 120cc Heads are Killing my Compression! Later G 8) |
Re: Dart 355 CNC heads, stud girdle, & Crower rocker arm
Originally Posted by hammertime
Originally Posted by tcarda
What I am looking for is opinions on a set of Dart 355 CNC heads that I have so I know what they are worth. I bought these new from Reher-Morrison in April 2007 and they have 40-50 passes on them. They have 2.300 and 1.88 SS valves, 3/8 inch guide plates, and Manley Nextec springs set up for .800 lift. I am also including the Reher-Morrison stud girdle and a set of Crower 1.7 ratio stainless steel rocker arms that were put on my engine the same time as the heads. The heads have never been hurt and they are still on my engine, but I am changing my engine program for next year and would like to sell. What is the heads, stud girdle, and rockers worth? Thanks for your input. :D
|
PM me a price once you decide what you think they're worth I might be interested.
|
Originally Posted by dparker
PM me a price once you decide what you think they're worth I might be interested.
|
All times are GMT -8. The time now is 03:24 AM. |