![]() |
Originally Posted by midsouthhotrods
If this is how racingjunk people treat there paying customers I will call tomorrow and I will be done with racingjunk. I have not done anything and people treat me like this that is fine. I will call them tomorrow and cancel my memberships.
Full of BS and taking people for all he can,and using the kids as an excuse,Jason did the same damn thing |
Originally Posted by topsportsman1
No I don't work for Racing Junk,I am here to keep the trolls in line.
I am a CRJ and honor paying member myself |
Originally Posted by topsportsman1
Originally Posted by midsouthhotrods
If this is how racingjunk people treat there paying customers I will call tomorrow and I will be done with racingjunk. I have not done anything and people treat me like this that is fine. I will call them tomorrow and cancel my memberships.
Full of BS and taking people for all he can,and using the kids as an excuse,Jason did the same damn thing |
Originally Posted by midsouthhotrods
Also this is why no one can work it out. If it is not pete dogging someone out it is someone else. Everytime I think I am just gonna make it right someone jumps up in my face and starts s with me. Why can't some people just act like adults and see what happens?
|
Originally Posted by topsportsman1
Originally Posted by midsouthhotrods
Also this is why no one can work it out. If it is not pete dogging someone out it is someone else. Everytime I think I am just gonna make it right someone jumps up in my face and starts s with me. Why can't some people just act like adults and see what happens?
|
and tomorrow when you all read this. I know you will all agree with topspprtsman but that is ok. I will not be back on the forum. I very seriously doubt if I will even be back on rj at all. if they will refund what time I have left on my memberships. I know I will not. If they have someone watching the site that acts like that calling people names like that I don't wanna be a part of that. I want to thank the few of you that i have talked to that made sence. You guys made me think today and relize what was right but Topsportsman messed me all up again.
|
Someone should call the state on you and have you investigated
Maybe Pete will |
Originally Posted by topsportsman1
Someone should call the state on you and have you investigated
Maybe Pete will |
To all you rl members. I am sorry, I just said today I did not let my temper get away but I did with topsportsman. that is not like me but I did. But I still didn't like pete did. But you guys have a good life and good luck in everything you do in the future. I am done with this. I will not be back. Thanks Again for the support that i did get.
|
Ok James hasn't scammed anyone he is an honest man and I/My dad has known him for a good while now and as he may not be perfect like all of us I haven't had any sign that he is a bad person by any means I guess this over the computer talking tells you different from what they really are I guarantee if you took the chance to meet him and his family you'd realize that his family and him are no different than any other family sure they might have their ups and downs but thats like everyone else!! Well that all I have to say and another thing to note while at the dragstrip I traded on some stuff and got more than was supposed to be given to me and I thank them for that and hope this will encourage others to talk to people before jumping to conclusions about them!! And have recieved other items from his cousin heads,pistons/rods,73-87 chevy truck headers and I think him also for giving me that stuff its a real help when you have no where to begin on a vehicle project!!! So there not all bad just because Jason has pissed people off!! JMO and talk to yall later couldn't help but post another comment and I know I will probably have tons of crap in the morning just because I said I'm through with the forum!!
|
I myself am reserving judgement on james on this until we see the evidence of what the engine is and how james handles this in the end. topsportsman has pointed out a pattern of behavor surounding james but not involving him yet. James deserves the benifit of doubt and see how he handles this in the end, this will prove the kinda man he is. jmo, mike
|
this forum has always dealed in facts and proof.. we are always telling people to prove what they are claiming and then we go from there .
we have a first time poster come on here and make claims with no proof and a paying member defending himself because who he is kin to. as stated before , I do NOT know either party . but after being called scum and being told to get fu*ked , I don't care if the man got a 6 cylinder in his hippy van .I don't care what kind of proof he has now. since when does a first time poster with no proof and a nasty mouth get his way around here . you looked at it , you traded for what you saw , its yours ...belittleing a man and his wife is out of line , PERIOD...if you have a problem with James , BE A MAN and go to him and settle it like men..how in the hell is getting on here complaining about someone drawing a check and begging for food for his family going to solve your problem,,,ITS NOT.. I don't see how this forum can solve you alls problem , you need to meet somewhere and work it out..all this crap about private eyes and fbi is about the funniest crap I ever heard...BE A MAN and work out your own problems...what do you want out of this forum , you want us to do your work for you??? we didn't get you in this mess and we can't get you out of it,,,,as far as I'm concerned you can do the same thing you told this whole forum to do...... :? |
Originally Posted by maniac
this forum has always dealed in facts and proof.. we are always telling people to prove what they are claiming and then we go from there .
we have a first time poster come on here and make claims with no proof and a paying member defending himself because who he is kin to. as stated before , I do NOT know either party . but after being called scum and being told to get fu*ked , I don't care if the man got a 6 cylinder in his hippy van .I don't care what kind of proof he has now. since when does a first time poster with no proof and a nasty mouth get his way around here . you looked at it , you traded for what you saw , its yours ...belittleing a man and his wife is out of line , PERIOD...if you have a problem with James , BE A MAN and go to him and settle it like men..how in the hell is getting on here complaining about someone drawing a check and begging for food for his family going to solve your problem,,,ITS NOT.. I don't see how this forum can solve you alls problem , you need to meet somewhere and work it out..all this crap about private eyes and fbi is about the funniest crap I ever heard...BE A MAN and work out your own problems...what do you want out of this forum , you want us to do your work for you??? we didn't get you in this mess and we can't get you out of it,,,,as far as I'm concerned you can do the same thing you told this whole forum to do...... :? |
x2 :shock: :shock: 8) 8)
|
Thank you ''Tom'' That is why i don't want anything and i mean anything to do with ''midsouth'' something is fishy with the whole bunch :!: Seem's one scam's for awhile then the other start's :!: Just not right :!: :!: JMO Mark Arnold
|
Well... have not been here since Friday, guess I missed a few things. 17 pages??? Amazing. I can't stay here much right now; I have to go trade my 69 Camaro for a Caravan. Scoot
|
Originally Posted by Rigsby
Well... have not been here since Friday, guess I missed a few things. 17 pages??? Amazing. I can't stay here much right now; I have to go trade my 69 Camaro for a Caravan. Scoot
|
Originally Posted by Rigsby
Well... have not been here since Friday, guess I missed a few things. 17 pages??? Amazing. I can't stay here much right now; I have to go trade my 69 Camaro for a Caravan. Scoot
|
I have traded with both anthony and james on a couple of occasions and have never had a problem with either one. Sounds like the guy should have checked the van out a little more closely before he loaded it up and took it away. It may have been posted wrong, but i don't think it sounds like it was intentional to me IMO. Bob.
|
pictures
holiday tell me how to put pictures on this forum so everyone can see the numbers on the 305 thanks!
|
pete18, any pic's of the block # stamping # yet ??
|
Re: pictures
Originally Posted by pete18
holiday tell me how to put pictures on this forum so everyone can see the numbers on the 305 thanks!
|
this should help. http://forums.racingjunk.com/viewtopic.php?t=2876
|
Oh boy another newbie with only one post praising James,Littlerod,anthony, Hmmmmmm Well now :!: :!: :!: JMO :!: Mark Arnold
|
Originally Posted by mopar1968
Oh boy another newbie with only one post praising James,Littlerod,anthony, Hmmmmmm Well now :!: :!: :!: JMO :!: Mark Arnold
|
Been on Rj since 08, but i don't usually get on the forums much so i am not really very new. Just figured i would give my pennies worth. Thanks, Bob.
|
Here is what i think :lol: :lol: :lol: :lol: :lol: I would say your right Paul :!: JMO Mark Arnold
|
Mark do you know me???
|
Could be :!: Think about it :!: :!:
|
Where do you know me from??
|
Your from Columbus Ms right :?: How close is that to Corinth Ms :?:
|
About 2 and a half hours north of me. Why?
|
Just courious that's all :!: :!:
|
You really don't know me and i wasn't praising anybody. No i am not best friends with james or anthony either. I really have traded a couple of times with them and not had any problems at all other than driving up there. The only reason i saw the post is that i like to keep up with the current scammers on here because i do alot of trading myself. I don't usually post on here, but i saw his user name in the post. I posted what i knew about them and got labeled a "newbie" and my opinion was dismissed. If you really don't know someone you should at least hear what they have to say don't you think? That really doesn't make me want to come back and post anything anymore. Bob. Just my opinion!!!!!!!!!
|
First of all i donot know either one of these traders/people., and maybe i don't want too.
First and formost both people misrepresented the vehicles that they traded. Neither one knew what they said, and that's sad when you're looking at a potentually $10,000.00 vehicle, which is what it may cost too build either one of them. First to James, i'm a little amazed that you have traded/sold 300 vehicles and didn't know what your son was trading. If i would have a $10,000.00 vehicle for sale or trade i would know every bolt and nut on it and have proof of it. As for Anthony, he is a child and i don't care if he's 9 yrs old or 15 yrs. old it's your responsibility to know what he's doing and control what he's doing. He can in no way know much about cars even if he's been watching/helping you since he was 10 yrs. old ( and i've seen some nice cars that you have owned/sold in your posting) Now about Top sportmans post about IP addresses. I'm a little amazed that you didn't know what he was talking about. Every computer logged into RJ shows too him where it's comming from, being a mod for another site for yrs., we have the soft ware to actually see where you live, your physical address ph # etc. and anything else that we might want too know. You are not unknown once you log into the site, every computer has a foot print, how do think the law and fBI track child porn? O'K about the two vehicles, first i don't like either one of them, 3rd generation Camero's are a dime a doz., the vans i can't believe any body would want one. 2ndly i'm not sure the van that Anthony posted was the bad azz van from Pinks, the van on pinks had port holes, your's did not. I have too admit that the van sounded better than the camero in the vid., but that's only a cam. The Camero sounded like a stock 427 or a stock 454 in my opinion. Still i think you got the better deal, the Camero is a 6 second car with a few changes with what it has. It sounded like it didn't have a gear, converter, or good tuning, maybe some fuel problem. I'd bet money i could turn it into a 6 second car in 48 hrs. for a few hundred bucks. The car weighs 3350 lbs fractory weight. I don't think it has a .738 cam and even if it does it's to big for a pump gas motor. Here's what a 468" pump gas motor is supposed too sound like, the cam is only .659/663 with a 1050 dom. http://www.motionbox.com/video/show/...f323c441dab7d8 I built the motor in this car and yes i know every bolt and nut, and everything about it, and yes the 9.77 is ligit it ran that at Baton Rouge in March at 137 mph in the qtr. It weighs 3700 lbs without the 200 lb driver. With that said i still donot believe Anthony should be selling anything without supervision, and far as Burns is concerned he should butt out, he doesn't have a clue about racing or building. JMO Zip. |
Originally Posted by zipper06
First of all i donot know either one of these traders/people., and maybe i don't want too.
First and formost both people misrepresented the vehicles that they traded. Neither one knew what they said, and that's sad when you're looking at a potentually $10,000.00 vehicle, which is what it may cost too build either one of them. First to James, i'm a little amazed that you have traded/sold 300 vehicles and didn't know what your son was trading. If i would have a $10,000.00 vehicle for sale or trade i would know every bolt and nut on it and have proof of it. As for Anthony, he is a child and i don't care if he's 9 yrs old or 15 yrs. old it's your responsibility to know what he's doing and control what he's doing. He can in no way know much about cars even if he's been watching/helping you since he was 10 yrs. old ( and i've seen some nice cars that you have owned/sold in your posting) Now about Top sportmans post about IP addresses. I'm a little amazed that you didn't know what he was talking about. Every computer logged into RJ shows too him where it's comming from, being a mod for another site for yrs., we have the soft ware to actually see where you live, your physical address ph # etc. and anything else that we might want too know. You are not unknown once you log into the site, every computer has a foot print, how do think the law and fBI track child porn? O'K about the two vehicles, first i don't like either one of them, 3rd generation Camero's are a dime a doz., the vans i can't believe any body would want one. 2ndly i'm not sure the van that Anthony posted was the bad azz van from Pinks, the van on pinks had port holes, your's did not. I have too admit that the van sounded better than the camero in the vid., but that's only a cam. The Camero sounded like a stock 427 or a stock 454 in my opinion. Still i think you got the better deal, the Camero is a 6 second car with a few changes with what it has. It sounded like it didn't have a gear, converter, or good tuning, maybe some fuel problem. I'd bet money i could turn it into a 6 second car in 48 hrs. for a few hundred bucks. The car weighs 3350 lbs fractory weight. I don't think it has a .738 cam and even if it does it's to big for a pump gas motor. Here's what a 468" pump gas motor is supposed too sound like, the cam is only .659/663 with a 1050 dom. http://www.motionbox.com/video/show/...f323c441dab7d8 I built the motor in this car and yes i know every bolt and nut, and everything about it, and yes the 9.77 is ligit it ran that at Baton Rouge in March at 137 mph in the qtr. It weighs 3700 lbs without the 200 lb driver. With that said i still donot believe Anthony should be selling anything without supervision, and far as Burns is concerned he should butt out, he doesn't have a clue about racing or building. JMO Zip. |
And If you notice Zip you keep spelling Camaro wrong!! :lol: :lol: :lol:
|
Burns,People who live in glass houses, should not throw stones!
|
Yea I know I have faults and spell things wrong but I couldn't pass up the opportunity to have something to say against him for saying basically that I'm stupid and don't know what I'm talking about and I might not know what I'm talking about all the time but I put my input in and what I think!!!
|
Young boy burns,
Zip has forgotten more than you will ever know. You will one day get your dose of reality. :lol: Go back and read your own posts, you aren't much on grammer or spelling yourself genius.
Originally Posted by burnskustomz
Originally Posted by zipper06
First of all i donot know either one of these traders/people., and maybe i don't want too.
First and formost both people misrepresented the vehicles that they traded. Neither one knew what they said, and that's sad when you're looking at a potentually $10,000.00 vehicle, which is what it may cost too build either one of them. First to James, i'm a little amazed that you have traded/sold 300 vehicles and didn't know what your son was trading. If i would have a $10,000.00 vehicle for sale or trade i would know every bolt and nut on it and have proof of it. As for Anthony, he is a child and i don't care if he's 9 yrs old or 15 yrs. old it's your responsibility to know what he's doing and control what he's doing. He can in no way know much about cars even if he's been watching/helping you since he was 10 yrs. old ( and i've seen some nice cars that you have owned/sold in your posting) Now about Top sportmans post about IP addresses. I'm a little amazed that you didn't know what he was talking about. Every computer logged into RJ shows too him where it's comming from, being a mod for another site for yrs., we have the soft ware to actually see where you live, your physical address ph # etc. and anything else that we might want too know. You are not unknown once you log into the site, every computer has a foot print, how do think the law and fBI track child porn? O'K about the two vehicles, first i don't like either one of them, 3rd generation Camero's are a dime a doz., the vans i can't believe any body would want one. 2ndly i'm not sure the van that Anthony posted was the bad azz van from Pinks, the van on pinks had port holes, your's did not. I have too admit that the van sounded better than the camero in the vid., but that's only a cam. The Camero sounded like a stock 427 or a stock 454 in my opinion. Still i think you got the better deal, the Camero is a 6 second car with a few changes with what it has. It sounded like it didn't have a gear, converter, or good tuning, maybe some fuel problem. I'd bet money i could turn it into a 6 second car in 48 hrs. for a few hundred bucks. The car weighs 3350 lbs fractory weight. I don't think it has a .738 cam and even if it does it's to big for a pump gas motor. Here's what a 468" pump gas motor is supposed too sound like, the cam is only .659/663 with a 1050 dom. http://www.motionbox.com/video/show/...f323c441dab7d8 I built the motor in this car and yes i know every bolt and nut, and everything about it, and yes the 9.77 is ligit it ran that at Baton Rouge in March at 137 mph in the qtr. It weighs 3700 lbs without the 200 lb driver. With that said i still donot believe Anthony should be selling anything without supervision, and far as Burns is concerned he should butt out, he doesn't have a clue about racing or building. JMO Zip. |
| All times are GMT -8. The time now is 07:45 PM. |