|
Thanks to my friends for backing me up. I think we all have a clear understanding of a man's word. When that word is comprimised & then publicly challenged, I have no problem defending the victim. I have to agree w/ Scorp on this, he seller is deverting the attention to me in an attempt to change the subject. Anyways, thanks again & I would do a deal w/ any of you guys (Scorp, Harb, Fla, KW Tod, Double-d, etc...). You are all good guys!
Sox: This deal IS what it IS. The only bad part is that your denial prevents you from becomming more honest. In the end, you are the one who has to sleep at night with yourself. Again, there is alot more here at stake than a cheap set of bearings... but I am glad the dispute is over. Scooter |
355 motor
Well guy's I really appreciate all of your help and understanding with this matter. He(sox) say's bearings are on the way to me shipped from jegs. Motor is tore down, everything marked and boxed, going to machine shop on wednesday to be checked furthur, along with crankshaft . I have been getting e-mails from people I didn't even know offering either help or spare part's if needed . All I can say is, WOW . Thank's to all of you . It's going to cost some money to get it straight but I will know for sure what I have when I'm done . I will know more after the machine shop has a look .
|
355 motor
Hey Sox
What goes around come's around. Thanks for everything or nothing. However you may see it. See ya at the drage strip. |
Im at the track most Sundays come over and say HI.
|
Re: 355 motor
Originally Posted by RS69RACE
Well guy's I really appreciate all of your help and understanding with this matter. He(sox) say's bearings are on the way to me shipped from jegs. Motor is tore down, everything marked and boxed, going to machine shop on wednesday to be checked furthur, along with crankshaft . I have been getting e-mails from people I didn't even know offering either help or spare part's if needed . All I can say is, WOW . Thank's to all of you . It's going to cost some money to get it straight but I will know for sure what I have when I'm done . I will know more after the machine shop has a look .
Just a thought on my part. Not trying to stir things up any. |
Bearings
I believe they are talking about cam bearings.
|
(Quote from Sox post at bottom of page 1)
and he said to make it right that I should buy him rod and main bearings and I agreed. Maybe the crank won't need to be ground, and the bearings will work, hopefully...................... :) GOOD LUCK |
Originally Posted by lano
(Quote from Sox post at bottom of page 1)
and he said to make it right that I should buy him rod and main bearings and I agreed. Maybe the crank won't need to be ground, and the bearings will work, hopefully...................... :) GOOD LUCK |
Maybe they're file fit bearings... :roll: :mrgreen:
|
Now this is getting funny. And Sox was mad at me... JEEEZ, he ought to take a hard look at his OWN WORDS.
|
| All times are GMT -8. The time now is 11:12 AM. |