Racingjunk Forums
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page

Racingjunk Forums (https://www.racingjunk.com/forums/index.php)
-   Engine Tech (https://www.racingjunk.com/forums/forumdisplay.php?f=9)
-   -   Paranoid about lifters (https://www.racingjunk.com/forums/showthread.php?t=21557)

Tod74 08-10-2008 07:36 PM
Originally Posted by olds48
I got Comps.Now I'm scared :shock: My buddy's Crowers came apart just a little while ago with only 20 -25 passes on it!He only had 600# of open spring pressure
Which comps do you have? I had the cheapest ones..like 240 bucks...and this was several years ago too...The Cranes I have in there now were $514

olds48 08-11-2008 04:22 AM
The Comps I have are part # 819-16.Of course my spring pressure is only 435# open.And that's with a solid roller :D

olds48 08-11-2008 04:28 AM
Checked their site.PBM lifters for bbc solid roller,$300.Not bad at all.

hammertime 08-11-2008 07:19 AM
Originally Posted by olds48
Checked their site.PBM lifters for bbc solid roller,$300.Not bad at all.
Not bad at all, my best advice on them is this if you put a ton of passes on yearly and dont replace them but every few get the Pro Series if you dont put a lot of passes on or replace them yearly get the cheaper ones. I have a set of both not a lot of difference but there is some, extra oiling holes and the pro series I bieleve is rebuildable.

hammertime 08-11-2008 09:34 AM
I have some pics of the PBM lifter I will post after a bit here got to get them on www first


All times are GMT -8. The time now is 09:21 PM.
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page