Racingjunk Forums
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page

Racingjunk Forums (https://www.racingjunk.com/forums/index.php)
-   Engine Tech (https://www.racingjunk.com/forums/forumdisplay.php?f=9)
-   -   help with sbc 406 - 434 (https://www.racingjunk.com/forums/showthread.php?t=20122)

zipper06 03-17-2008 04:59 PM
Re: 406 - 434?
 
Originally Posted by bowler
zip glad to here from you, the zoomies need to be narrowed? i'am sure 406 is big enough for what i want to do. i have a gas 1050 dominator afr says their runner is raised 3/16" so i hope i can mill an intake to fit?thanks for the info Doug
The zoomies donot need to be narrowed, but i may have to cut off the up-turns, due to the fact they will stick out of the body lines more than they did on your 34 willy's. I guess they will be called weed cutters then :P

Zip.

floritejoe 03-17-2008 05:02 PM
Re: AFR 227's
 
Originally Posted by maxpower671
Floritejoe, that's impressive power you are making with those AFR 227's! what kind of fuel are you burning? how much additional work to those heads? are you using giggle juice too? how big is that roller? once again, very nice! inquiring minds want to know..
Running Alcohol, but switching over to gas this season. No additional work done to the CNC comp ported AFR 227 heads. No juice, but I just bought a kit that I will try this year to compensate for the fuel switch power loss. It's a big roller with over 750 lift and [email protected]

Gdaddy 05-29-2008 09:23 PM
My 434 with 11x heads with a 1050 dominator small roller runs 5.70s and 5.80s and 8.90s @ 2850 lbs in an all steel camaro

ima400 06-05-2008 11:44 PM
i cant see why a 406 with 227 cc heads wont work . ive got a 414 with these heads , made 675 hp on dyno , run's 9.26 @ 143 mph in a 2780 pond car


All times are GMT -8. The time now is 05:54 AM.
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page