Racingjunk Forums
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Racingjunk Forums (https://www.racingjunk.com/forums/index.php)
-   Engine Tech (https://www.racingjunk.com/forums/forumdisplay.php?f=9)
-   -   exhaust gas temp help (https://www.racingjunk.com/forums/showthread.php?t=31389)

maxpower671 12-18-2011 09:38 AM
Originally Posted by mrbigtrucks
sbc
9:1
477/477 268 duration cam
torker intake
holley 750 witch is to big
some 1.94/1.5 heads stock besides springs and i had them milled to increase compression
:twisted: - logan
i agree a smaller carb would be better...say a 650 Holley...play with the jetting...total timing usually is in the upper 30's degrees.. that's about it.. 8)

hotrod1994 12-18-2011 01:23 PM
ok thanks


All times are GMT -8. The time now is 09:00 PM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page