Racingjunk Forums
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Racingjunk Forums (https://www.racingjunk.com/forums/index.php)
-   Transmission (https://www.racingjunk.com/forums/forumdisplay.php?f=14)
-   -   Powerglide ? (https://www.racingjunk.com/forums/showthread.php?t=29073)

Tod74 10-26-2010 05:46 PM
Originally Posted by hammertime
I look for powerglide stuff weekly, a lot of times you can find a stock powerglide with the 1.76 for $100-150, keep the part you need and off the 1.76 and almost break even

:D

craiglist is great for stock glides
Most people that don't know anything about drag racing think you are stupid for wanting one. :D Some will almost give em to ya to get em out of the garage floor...kinda like a 305 sbc

Then there are those that think they are worth a fortune.

cepx111 10-26-2010 11:55 PM
Originally Posted by Tod74
Originally Posted by hammertime
I look for powerglide stuff weekly, a lot of times you can find a stock powerglide with the 1.76 for $100-150, keep the part you need and off the 1.76 and almost break even

:D

craiglist is great for stock glides
Some will almost give em to ya to get em out of the garage floor.
Yep, that was me about 5 years ago, sold a complete 1.76 glide to the local 2nd hand speed shop, $50 :shock:

Tod74 10-27-2010 02:39 PM
Originally Posted by cepx111
Originally Posted by Tod74
Originally Posted by hammertime
I look for powerglide stuff weekly, a lot of times you can find a stock powerglide with the 1.76 for $100-150, keep the part you need and off the 1.76 and almost break even

:D

craiglist is great for stock glides
Some will almost give em to ya to get em out of the garage floor.
Yep, that was me about 5 years ago, sold a complete 1.76 glide to the local 2nd hand speed shop, $50 :shock:
I thought you were a gung ho powerglide guy....since you bracket race so much. What do you run a 400?

markdunlap 10-31-2010 04:10 PM
powerglide
 
The outside diameter of the spline on a V-8 powerglide is .885" approx.

The outside diameter on a 6 cylinder is about .030" smaller I believe.


All times are GMT -8. The time now is 09:26 AM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page