|
Originally Posted by shawnp
You are right at that HP rating that is borderline with the 1.76 gear. How old is the trans? is it a stock pump? It could be a couple things from pump gears to gear set. I would think the converter would not be the likely culprit in this instance. If Marco Abbruzi built the trans, I would give him a call.
Also failed to mention, it has the race pump. Thx for the inputs guys, I almost got it out today, will be -out tomorrow for sure, I'll let ya'll know what I find. Thx again, Cp |
I am going to lean on the input shaft with this one.
|
Well guys it was the plantaries, I crumbled them suckers good.
Called Marco at Abruzzi racing and he qouted me a price of $175 plus shipping for the 1.76's gear set or $900 for the "better" straight cut 1.80's. He said same thing as alot of you that at my HP level I'm pushing it with 176's but that he wouldnt be afraid to run them again, said they have about a 1/2 year life cycle in race trim so he said it was time for them to go anyway, no biggie. I had 2 full seasons on them. For now I'm gonna low ball it and go with the 1.76's so I can get back to racing and save up and get the 180's later on. Cp |
How fast you go ? ET ?
I was runnin 9.30's @ 136 on my stock glide till i switch to a deadenbear w/ a 1.80. Just one season tho my rookie year, maybe 75 passes or so. Craig |
Originally Posted by cepx111
Well guys it was the plantaries, I crumbled them suckers good.
Called Marco at Abruzzi racing and he qouted me a price of $175 plus shipping for the 1.76's gear set or $900 for the "better" straight cut 1.80's. He said same thing as alot of you that at my HP level I'm pushing it with 176's but that he wouldnt be afraid to run them again, said they have about a 1/2 year life cycle in race trim so he said it was time for them to go anyway, no biggie. I had 2 full seasons on them. For now I'm gonna low ball it and go with the 1.76's so I can get back to racing and save up and get the 180's later on. Cp |
Dave,
What's Garry using? Hopefully not BTE. |
Originally Posted by shawnp
Dave,
What's Garry using? Hopefully not BTE. I think BTE wants him to become a dealer he's been up in the air on it. |
I sell the 1.80 for $799 with a 2 year warranty. Matt Sommers 727-375-4737
|
What gear set you selling for $799
Dave- hope he does not do it. There is a reason why BTE prices dropped. Ever since they made the move with production 3-4 years ago the quality of the gear set has greatly decrease. A lot of guys that were all about the BTE stuff have gone other routes. |
Originally Posted by gnsrule
How fast you go ? ET ?
I was runnin 9.30's @ 136 on my stock glide till i switch to a deadenbear w/ a 1.80. Just one season tho my rookie year, maybe 75 passes or so. Craig |
| All times are GMT -8. The time now is 12:19 AM. |